Prevailing Wage Index
HomePrevailing wage by stateIowaDeterminations › IA20260028

Wage determination IA20260028

Heavy, Highway construction - Iowa, revision 4, modified 2026-06-25

Verify against the official document: this page mirrors WD IA20260028 revision 4 (retrieved ) for reference. The determination incorporated into your contract governs - read the official copy at SAM.gov.

Rate schedules

Parsed from the official text as a reading aid - zone pay, group definitions and footnotes in the full text below modify specific classifications. Identifier prefixes: union-agreement rates carry the local's id, SU marks DOL survey rates (how to read a determination).

SAIA2026-001 (collectively bargained (union) rate, 05/13/2026)

ClassificationBase rateFringes
BRICKLAYER/STONE MASON: ZONE 1 (The Counties of Polk, Warren, and Dallas for all Crafts, and Linn County Carpenters only.)$37.4419.17
BRICKLAYER/STONE MASON: ZONE 2 (The Counties of Dubuque for all Crafts and Linn County for all Crafts except Carpenters.)$37.4419.17
BRICKLAYER/STONE MASON: ZONE 3 (The Cities of Burlington (including West Burlington), Clinton, Fort Madison, Keokuk, and Middleton (including the Iowa Army Ammunition Plant) and Mu$37.4419.17
BRICKLAYER/STONE MASON: ZONE 4 (Story, Black Hawk, Cedar, Jasper, Jones, Jackson, Louisa, Madison, and Marion Counties; Clinton County (except the City of Clinton), Johnson County,$35.7517.85
BRICKLAYER/STONE MASON: ZONE 5 (All areas of the state not listed)$32.6517.85
Carpenter & Piledrivermen: ZONE 1 (The Counties of Polk, Warren, and Dallas for all Crafts, and Linn County Carpenters only.)$35.2718.48
Carpenter & Piledrivermen: ZONE 2 (The Counties of Dubuque for all Crafts and Linn County for all Crafts except Carpenters.)$33.8018.63
Carpenter & Piledrivermen: ZONE 3 (The Cities of Burlington (including West Burlington), Clinton, Fort Madison, Keokuk, and Middleton (including the Iowa Army Ammunition Plant) and$33.6818.88
Carpenter & Piledrivermen: ZONE 4 (Story, Black Hawk, Cedar, Jasper, Jones, Jackson, Louisa, Madison, and Marion Counties; Clinton County (except the City of Clinton), Johnson Coun$33.4516.25
Carpenter & Piledrivermen: ZONE 5** All areas of the state not listed. (** CARPENTERS AND PILEDRIVERMEN, or IRONWORKERS (ZONE 5) Setting of structural steel; any welding incidental$32.9014.45
CONCRETE FINISHER: ZONE 1 (The Counties of Polk, Warren, and Dallas for all Crafts, and Linn County Carpenters only.)$32.5116.35
CONCRETE FINISHER: ZONE 2 (The Counties of Dubuque for all Crafts and Linn County for all Crafts except Carpenters.)$32.5116.35
CONCRETE FINISHER: ZONE 3 (The Cities of Burlington (including West Burlington), Clinton, Fort Madison, Keokuk, and Middleton (including the Iowa Army Ammunition Plant) and Muscati$32.5116.35
CONCRETE FINISHER: ZONE 4 (Story, Black Hawk, Cedar, Jasper, Jones, Jackson, Louisa, Madison, and Marion Counties; Clinton County (except the City of Clinton), Johnson County, Musc$30.6612.58
CONCRETE FINISHER: ZONE 5 (All areas of the state not listed)$29.6112.58
ELECTRICIAN (STREET AND HIGHWAY LIGHTING AND TRAFFIC SIGNALS): ZONE 1, 2, AND 3 (ZONE 1 The Counties of Polk, Warren, and Dallas for all Crafts, and Linn County Carpenters only. ZO$42.9019.30
ELECTRICIAN (STREET AND HIGHWAY LIGHTING AND TRAFFIC SIGNALS): ZONE 4 (Story, Black Hawk, Cedar, Jasper, Jones, Jackson, Louisa, Madison, and Marion Counties; Clinton County (excep$41.6019.30
ELECTRICIAN (STREET AND HIGHWAY LIGHTING AND TRAFFIC SIGNALS): ZONE 5 (All areas of the state not listed)$40.2017.80
IRONWORKER (SETTING OF STRUCTURAL STEEL) ZONE 1 (The Counties of Polk, Warren, and Dallas for all Crafts, and Linn County Carpenters only.)$33.0320.72
IRONWORKER (SETTING OF STRUCTURAL STEEL) ZONE 2 (The Counties of Dubuque for all Crafts and Linn County for all Crafts except Carpenters.)$31.3221.11
IRONWORKER (SETTING OF STRUCTURAL STEEL) ZONE 3 (The Cities of Burlington (including West Burlington), Clinton, Fort Madison, Keokuk, and Middleton (including the Iowa Army Ammunit$31.3121.25
IRONWORKER (SETTING OF STRUCTURAL STEEL) ZONE 4 (Story, Black Hawk, Cedar, Jasper, Jones, Jackson, Louisa, Madison, and Marion Counties; Clinton County (except the City of Clinton)$29.4920.21
IRONWORKER (SETTING OF STRUCTURAL STEEL) ZONE 5** All areas of the state not listed. (** CARPENTERS AND PILEDRIVERMEN, or IRONWORKERS (ZONE 5) Setting of structural steel; any weld$28.0119.34
LABORER: GROUP A - Carpenter tender on bridges and box culverts; CCTV* sewer inspection operator; curb machine (without a seat); deck hand; diamond & core drills; drill operator on$27.1814.45
LABORER: GROUP A - Carpenter tender on bridges and box culverts; CCTV* sewer inspection operator; curb machine (without a seat); deck hand; diamond & core drills; drill operator on$25.4214.45
LABORER: GROUP A - Carpenter tender on bridges and box culverts; CCTV* sewer inspection operator; curb machine (without a seat); deck hand; diamond & core drills; drill operator on$25.4214.45
LABORER: GROUP AA - Skilled pipelayer (sewer, water, and conduits) and tunnel laborers; asbestos abatement worker. ZONE 4 (Story, Black Hawk, Cedar, Jasper, Jones, Jackson, Louisa,$29.8514.45
LABORER: GROUP AA - Skilled pipelayer (sewer, water, and conduits) and tunnel laborers; asbestos abatement worker. ZONE 5 (All areas of the state not listed)$29.8514.45
LABORER: GROUP AA - Skilled pipelayer (sewer, water, and conduits) and tunnel laborers; asbestos abatement worker. ZONES 1, 2, & 3 (ZONE 1 The Counties of Polk, Warren, and Dallas $29.8514.45
LABORER: GROUP B - Air, gas, electric tool operator; barco hammer; carpenter tender; caulker; chain sawman; compressor (under 400 cfm); concrete finisher tender; concrete processin$25.3314.45
LABORER: GROUP B - Air, gas, electric tool operator; barco hammer; carpenter tender; caulker; chain sawman; compressor (under 400 cfm); concrete finisher tender; concrete processin$23.5714.45
LABORER: GROUP B - Air, gas, electric tool operator; barco hammer; carpenter tender; caulker; chain sawman; compressor (under 400 cfm); concrete finisher tender; concrete processin$23.5714.45
LABORER: GROUP C - Scale weigh person; traffic control/flagger, surveillance or monitor; water carrier. ZONE 4 (Story, Black Hawk, Cedar, Jasper, Jones, Jackson, Louisa, Madison, a$21.6014.45
LABORER: GROUP C - Scale weigh person; traffic control/flagger, surveillance or monitor; water carrier. ZONE 5 (All areas of the state not listed).$ 21.60 14.45 LABORER: GROUP C - $22.2514.45
POWER EQUIPMENT OPERATOR: GROUP A - All terrain (off road) forklift; asphalt breakdown roller (vibratory); asphalt laydown machine; asphalt plant; asphalt screed; bulldozer (finish$35.3217.05
POWER EQUIPMENT OPERATOR: GROUP A - All terrain (off road) forklift; asphalt breakdown roller (vibratory); asphalt laydown machine; asphalt plant; asphalt screed; bulldozer (finish$36.5022.45
POWER EQUIPMENT OPERATOR: GROUP A - All terrain (off road) forklift; asphalt breakdown roller (vibratory); asphalt laydown machine; asphalt plant; asphalt screed; bulldozer (finish$36.5032.60
POWER EQUIPMENT OPERATOR: GROUP A - All terrain (off road) forklift; asphalt breakdown roller (vibratory); asphalt laydown machine; asphalt plant; asphalt screed; bulldozer (finish$39.8219.38
POWER EQUIPMENT OPERATOR: GROUP A - All terrain (off road) forklift; asphalt breakdown roller (vibratory); asphalt laydown machine; asphalt plant; asphalt screed; bulldozer (finish$40.1719.38
POWER EQUIPMENT OPERATOR: GROUP B - Articulated off road hauler, asphalt heater/planer; asphalt material transfer vehicle; asphalt roller; belt loader or similar loader; bulldozer $35.3622.45
POWER EQUIPMENT OPERATOR: GROUP B - Articulated off road hauler, asphalt heater/planer; asphalt material transfer vehicle; asphalt roller; belt loader or similar loader; bulldozer $38.2219.38
POWER EQUIPMENT OPERATOR: GROUP B - Articulated off road hauler, asphalt heater/planer; asphalt material transfer vehicle; asphalt roller; belt loader or similar loader; bulldozer $38.6219.38
POWER EQUIPMENT OPERATOR: GROUP B - Articulated off road hauler, asphalt heater/planer; asphalt material transfer vehicle; asphalt roller; belt loader or similar loader; bulldozer $35.2032.60
POWER EQUIPMENT OPERATOR: GROUP B - Articulated off road hauler, asphalt heater/planer; asphalt material transfer vehicle; asphalt roller; belt loader or similar loader; bulldozer $34.2817.05
POWER EQUIPMENT OPERATOR: GROUP C - Boom & winch truck; concrete spreader/belt placer; deep wells for dewatering; farm type tractor (over 75 hp.) pulling disc or roller; forklift; $32.5517.05
POWER EQUIPMENT OPERATOR: GROUP C - Boom & winch truck; concrete spreader/belt placer; deep wells for dewatering; farm type tractor (over 75 hp.) pulling disc or roller; forklift; $33.0322.45
POWER EQUIPMENT OPERATOR: GROUP C - Boom & winch truck; concrete spreader/belt placer; deep wells for dewatering; farm type tractor (over 75 hp.) pulling disc or roller; forklift; $33.7032.60
POWER EQUIPMENT OPERATOR: GROUP C - Boom & winch truck; concrete spreader/belt placer; deep wells for dewatering; farm type tractor (over 75 hp.) pulling disc or roller; forklift; $36.1219.38
POWER EQUIPMENT OPERATOR: GROUP C - Boom & winch truck; concrete spreader/belt placer; deep wells for dewatering; farm type tractor (over 75 hp.) pulling disc or roller; forklift; $35.6719.38
POWER EQUIPMENT OPERATOR: GROUP D - Boiler; compressor; cure and texture machine; dow box; farm type or utility tractor (under 75 hp.) pulling disk, roller or other attachments; gr$31.5517.05
POWER EQUIPMENT OPERATOR: GROUP D - Boiler; compressor; cure and texture machine; dow box; farm type or utility tractor (under 75 hp.) pulling disk, roller or other attachments; gr$33.0322.45
POWER EQUIPMENT OPERATOR: GROUP D - Boiler; compressor; cure and texture machine; dow box; farm type or utility tractor (under 75 hp.) pulling disk, roller or other attachments; gr$33.7032.60
POWER EQUIPMENT OPERATOR: GROUP D - Boiler; compressor; cure and texture machine; dow box; farm type or utility tractor (under 75 hp.) pulling disk, roller or other attachments; gr$35.6719.38
POWER EQUIPMENT OPERATOR: GROUP D - Boiler; compressor; cure and texture machine; dow box; farm type or utility tractor (under 75 hp.) pulling disk, roller or other attachments; gr$36.1219.38
TRUCK DRIVER (AND PAVEMENT MARKING DRIVER/SWITCHPERSON): ZONE 1 (The Counties of Polk, Warren, and Dallas for all Crafts, and Linn County Carpenters only)$30.2513.50
TRUCK DRIVER (AND PAVEMENT MARKING DRIVER/SWITCHPERSON): ZONE 2 (The Counties of Dubuque for all Crafts and Linn County for all Crafts except Carpenters)$30.2513.50
TRUCK DRIVER (AND PAVEMENT MARKING DRIVER/SWITCHPERSON): ZONE 3 (The Cities of Burlington (including West Burlington), Clinton, Fort Madison, Keokuk, and Middleton (including the I$30.2513.50
TRUCK DRIVER (AND PAVEMENT MARKING DRIVER/SWITCHPERSON): ZONE 4 (Story, Black Hawk, Cedar, Jasper, Jones, Jackson, Louisa, Madison, and Marion Counties; Clinton County (except the $30.2512.00
TRUCK DRIVER (AND PAVEMENT MARKING DRIVER/SWITCHPERSON): ZONE 5 (All areas of the state not listed)$28.4112.00
Full official text of IA20260028 rev 4
"General Decision Number: IA20260028 06/25/2026


State: Iowa


Construction Types: Heavy and Highway


Counties: Iowa Counties of 
Adair, Adams, Allamakee, Appanoose, 
Audubon, Benton, Black Hawk, Boone, 
Bremer, Buchanan, Buena Vista, Butler, 
Calhoun, Carroll, Cass, Cedar, Cerro 
Gordo, Cherokee, Chickasaw, Clarke, 
Clay, Clayton, Clinton, Crawford, 
Dallas, Davis, Decatur, Delaware, Des 
Moines, Dickinson, Dubuque, Emmet, 
Fayette, Floyd, Franklin, Fremont, 
Greene, Grundy, Guthrie, Hamilton, 
Hancock, Hardin, Harrison, Henry, 
Howard, Humboldt, Ida, Iowa, Jackson, 
Jasper, Jefferson, Johnson, Jones, 
Keokuk, Kossuth, Lee, Linn, Louisa, 
Lucas, Lyon, Madison, Mahaska, Marion, 
Marshall, Mills, Mitchell, Monona, 
Monroe, Montgomery, Muscatine, O'Brien, 
Osceola, Page, Palo Alto, Plymouth, 
Pocahontas, Polk, Pottawattamie, 
Poweshiek, Ringgold, Sac, Shelby, Sioux, 
Story, Tama, Taylor, Union, Van Buren, 
Wapello, Warren, Washington, Wayne, 
Webster, Winnebago, Winneshiek, 
Woodbury, Worth and Wright




Heavy Construction (Does not include work on or pertaining to the Mississippi 
or Missouri Rivers or on Water and Sewage Treatment Plants)

Highway Construction (does not include building structures in rest areas)


Modification Number     Publication Date
          0                01/16/2026
          1                05/18/2026
          2                06/04/2026
          3                06/08/2026
          4                06/25/2026


 SAIA2026-001 05/13/2026
                                                     Rates                  Fringes
BRICKLAYER/STONE MASON: ZONE 1 (The Counties of 
Polk, Warren, and Dallas for all Crafts, and Linn 
County Carpenters only.)............................$ 37.44                  19.17
BRICKLAYER/STONE MASON: ZONE 2 (The Counties of 
Dubuque for all Crafts and Linn County for all 
Crafts except Carpenters.)..........................$ 37.44                  19.17
BRICKLAYER/STONE MASON: ZONE 3 (The Cities of 
Burlington (including West Burlington), Clinton, 
Fort Madison, Keokuk, and Middleton (including the 
Iowa Army Ammunition Plant) and Muscatine (and 
abutting municipalities of any such cities.)........$ 37.44                  19.17
BRICKLAYER/STONE MASON: ZONE 4 (Story, Black Hawk, 
Cedar, Jasper, Jones, Jackson, Louisa, Madison, and 
Marion Counties; Clinton County (except the City of 
Clinton), Johnson County, Muscatine County (except 
the City of Muscatine), the City of Council Bluffs, 
Lee County and Des Moines County.)..................$ 35.75                  17.85
BRICKLAYER/STONE MASON: ZONE 5 (All areas of the 
state not listed)...................................$ 32.65                  17.85
Carpenter & Piledrivermen: ZONE 1 (The Counties of 
Polk, Warren, and Dallas for all Crafts, and Linn 
County Carpenters only.)............................$ 35.27                  18.48
Carpenter & Piledrivermen: ZONE 2 (The Counties of 
Dubuque for all Crafts and Linn County for all 
Crafts except Carpenters.)..........................$ 33.80                  18.63
Carpenter & Piledrivermen: ZONE 3 (The Cities of 
Burlington (including West Burlington), Clinton, 
Fort Madison, Keokuk, and Middleton (including the 
Iowa Army Ammunition Plant) and Muscatine (and 
abutting municipalities of any such cities.)........$ 33.68                  18.88
Carpenter & Piledrivermen: ZONE 4 (Story, Black 
Hawk, Cedar, Jasper, Jones, Jackson, Louisa, 
Madison, and Marion Counties; Clinton County 
(except the City of Clinton), Johnson County, 
Muscatine County (except the City of Muscatine), 
the City of Council Bluffs, Lee County and Des 
Moines County.).....................................$ 33.45                  16.25
Carpenter & Piledrivermen: ZONE 5** All areas of 
the state not listed. (** CARPENTERS AND 
PILEDRIVERMEN, or IRONWORKERS (ZONE 5) Setting of 
structural steel; any welding incidental to bridge 
or culvert construction; setting concrete beams.)...$ 32.90                  14.45
CONCRETE FINISHER: ZONE 1 (The Counties of Polk, 
Warren, and Dallas for all Crafts, and Linn County 
Carpenters only.)...................................$ 32.51                  16.35
CONCRETE FINISHER: ZONE 2 (The Counties of Dubuque 
for all Crafts and Linn County for all Crafts 
except Carpenters.).................................$ 32.51                  16.35
CONCRETE FINISHER: ZONE 3 (The Cities of Burlington 
(including West Burlington), Clinton, Fort Madison, 
Keokuk, and Middleton (including the Iowa Army 
Ammunition Plant) and Muscatine (and abutting 
municipalities of any such cities.).................$ 32.51                  16.35
CONCRETE FINISHER: ZONE 4 (Story, Black Hawk, 
Cedar, Jasper, Jones, Jackson, Louisa, Madison, and 
Marion Counties; Clinton County (except the City of 
Clinton), Johnson County, Muscatine County (except 
the City of Muscatine), the City of Council Bluffs, 
Lee County and Des Moines County.)..................$ 30.66                  12.58
CONCRETE FINISHER: ZONE 5 (All areas of the state 
not listed).........................................$ 29.61                  12.58
ELECTRICIAN (STREET AND HIGHWAY LIGHTING AND 
TRAFFIC SIGNALS): ZONE 1, 2, AND 3 (ZONE 1 The 
Counties of Polk, Warren, and Dallas for all 
Crafts, and Linn County Carpenters only. ZONE 2 The 
Counties of Dubuque for all Crafts and Linn County 
for all Crafts except Carpenters. ZONE 3 The Cities 
of Burlington (including West Burlington), Clinton, 
Fort Madison, Keokuk, and Middleton (including the 
Iowa Army Ammunition Plant) and Muscatine (and 
abutting municipalities of any such cities).........$ 42.90                  19.30
ELECTRICIAN (STREET AND HIGHWAY LIGHTING AND 
TRAFFIC SIGNALS): ZONE 4 (Story, Black Hawk, Cedar, 
Jasper, Jones, Jackson, Louisa, Madison, and Marion 
Counties; Clinton County (except the City of 
Clinton), Johnson County, Muscatine County (except 
the City of Muscatine), the City of Council Bluffs, 
Lee County and Des Moines County.)..................$ 41.60                  19.30
ELECTRICIAN (STREET AND HIGHWAY LIGHTING AND 
TRAFFIC SIGNALS): ZONE 5 (All areas of the state 
not listed).........................................$ 40.20                  17.80
IRONWORKER (SETTING OF STRUCTURAL STEEL) ZONE 1 
(The Counties of Polk, Warren, and Dallas for all 
Crafts, and Linn County Carpenters only.)...........$ 33.03                  20.72
IRONWORKER (SETTING OF STRUCTURAL STEEL) ZONE 2 
(The Counties of Dubuque for all Crafts and Linn 
County for all Crafts except Carpenters.)...........$ 31.32                  21.11
IRONWORKER (SETTING OF STRUCTURAL STEEL) ZONE 3 
(The Cities of Burlington (including West 
Burlington), Clinton, Fort Madison, Keokuk, and 
Middleton (including the Iowa Army Ammunition 
Plant) and Muscatine (and abutting municipalities 
of any such cities.)................................$ 31.31                  21.25
IRONWORKER (SETTING OF STRUCTURAL STEEL) ZONE 4 
(Story, Black Hawk, Cedar, Jasper, Jones, Jackson, 
Louisa, Madison, and Marion Counties; Clinton 
County (except the City of Clinton), Johnson 
County, Muscatine County (except the City of 
Muscatine), the City of Council Bluffs, Lee County 
and Des Moines County.).............................$ 29.49                  20.21
IRONWORKER (SETTING OF STRUCTURAL STEEL) ZONE 5** 
All areas of the state not listed. (** CARPENTERS 
AND PILEDRIVERMEN, or IRONWORKERS (ZONE 5) Setting 
of structural steel; any welding incidental to 
bridge or culvert construction; setting concrete 
beams.).............................................$ 28.01                  19.34
LABORER: GROUP A - Carpenter tender on bridges and 
box culverts; CCTV* sewer inspection operator; curb 
machine (without a seat); deck hand; diamond & core 
drills; drill operator on air tracs, wagon drills, 
and similar drills; form setter/stringman on paving 
work; gunnite nozzleman; joint sealer kettleman; 
laser operator; mason tender (brick/stone), 
powderman tender; powderman/blaster; sign erector; 
saw operator; {(Zones 4 and 5) Skilled pipelayer 
(sewer, water, and conduits); tunnel laborer; 
asbestos abatement worker}. *new labor 
classification (CCTV: closed circuit television). 
ZONES 1, 2, & 3 (ZONE 1 The Counties of Polk, 
Warren, and Dallas for all Crafts, and Linn County 
Carpenters only. ZONE 2 The Counties of Dubuque for 
all Crafts and Linn County for all Crafts except 
Carpenters. ZONE 3 The Cities of Burlington 
(including West Burlington), Clinton, Fort Madison, 
Keokuk, and Middleton (including the Iowa Army 
Ammunition Plant) and Muscatine (and abutting 
municipalities of any such cities)..................$ 27.18                  14.45
LABORER: GROUP A - Carpenter tender on bridges and 
box culverts; CCTV* sewer inspection operator; curb 
machine (without a seat); deck hand; diamond & core 
drills; drill operator on air tracs, wagon drills, 
and similar drills; form setter/stringman on paving 
work; gunnite nozzleman; joint sealer kettleman; 
laser operator; mason tender (brick/stone), 
powderman tender; powderman/blaster; sign erector; 
saw operator; {(Zones 4 and 5) Skilled pipelayer 
(sewer, water, and conduits); tunnel laborer; 
asbestos abatement worker}. *new labor 
classification (CCTV: closed circuit television). 
ZONE 5 (All areas of the state not listed)..........$ 25.42                  14.45
LABORER: GROUP A - Carpenter tender on bridges and 
box culverts; CCTV* sewer inspection operator; curb 
machine (without a seat); deck hand; diamond & core 
drills; drill operator on air tracs, wagon drills, 
and similar drills; form setter/stringman on paving 
work; gunnite nozzleman; joint sealer kettleman; 
laser operator; mason tender (brick/stone), 
powderman tender; powderman/blaster; sign erector; 
saw operator; {(Zones 4 and 5) Skilled pipelayer 
(sewer, water, and conduits); tunnel laborer; 
asbestos abatement worker}. *new labor 
classification (CCTV: closed circuit television). 
ZONE 4 (Story, Black Hawk, Cedar, Jasper, Jones, 
Jackson, Louisa, Madison, and Marion Counties; 
Clinton County (except the City of Clinton), 
Johnson County, Muscatine County (except the City 
of Muscatine), the City of Council Bluffs, Lee 
County and Des Moines County.)......................$ 25.42                  14.45
LABORER: GROUP AA  - Skilled pipelayer (sewer, 
water, and conduits) and tunnel laborers; asbestos 
abatement worker. ZONE 4 (Story, Black Hawk, Cedar, 
Jasper, Jones, Jackson, Louisa, Madison, and Marion 
Counties; Clinton County (except the City of 
Clinton), Johnson County, Muscatine County (except 
the City of Muscatine), the City of Council Bluffs, 
Lee County and Des Moines County.)..................$ 29.85                  14.45
LABORER: GROUP AA  - Skilled pipelayer (sewer, 
water, and conduits) and tunnel laborers; asbestos 
abatement worker. ZONE 5 (All areas of the state 
not listed).........................................$ 29.85                  14.45
LABORER: GROUP AA  - Skilled pipelayer (sewer, 
water, and conduits) and tunnel laborers; asbestos 
abatement worker. ZONES 1, 2, & 3 (ZONE 1 The 
Counties of Polk, Warren, and Dallas for all 
Crafts, and Linn County Carpenters only. ZONE 2 The 
Counties of Dubuque for all Crafts and Linn County 
for all Crafts except Carpenters. ZONE 3 The Cities 
of Burlington (including West Burlington), Clinton, 
Fort Madison, Keokuk, and Middleton (including the 
Iowa Army Ammunition Plant) and Muscatine (and 
abutting municipalities of any such cities).........$ 29.85                  14.45
LABORER: GROUP B - Air, gas, electric tool 
operator; barco hammer; carpenter tender; caulker; 
chain sawman; compressor (under 400 cfm); concrete 
finisher tender; concrete processing materials and 
monitors; cutting torch on demolition; drill 
tender; dumpmen; electric drills; fence erectors; 
form line expansion joint assembler; form tamper; 
general laborer; grade checker; handling and 
placing metal mesh, dowel bars, reinforcing bars 
and chairs; hot asphalt laborer; installing 
temporary traffic control devices; jack hammerman; 
mechanical grouter; painter (all except stripers); 
paving breaker; planting trees, shrubs and flowers; 
power broom (not self-propelled); power buggyman; 
rakers; rodman (tying reinforcing steel); 
sandblaster; seeding and mulching; sewer utility 
topman/bottom man; spaders; stressor or 
stretcherman on pre or post tensioned concrete; 
stringman on re/surfacing/no grade control; 
swinging stage, tagline, or block and tackle; 
tampers; timberman; tool room men and checkers; 
tree climber; tree groundman; underpinning and 
shoring caissons over twelve feet deep; vibrators; 
walk behind trencher; walk behind paint stripers; 
walk behind vibrating compactor; water pumps (under 
three inch); work from bosun chair. ZONES 1, 2, & 3 
(ZONE 1 The Counties of Polk, Warren, and Dallas 
for all Crafts, and Linn County Carpenters only. 
ZONE 2 The Counties of Dubuque for all Crafts and 
Linn County for all Crafts except Carpenters. ZONE 
3 The Cities of Burlington (including West 
Burlington), Clinton, Fort Madison, Keokuk, and 
Middleton (including the Iowa Army Ammunition 
Plant) and Muscatine (and abutting municipalities 
of any such cities).................................$ 25.33                  14.45
LABORER: GROUP B - Air, gas, electric tool 
operator; barco hammer; carpenter tender; caulker; 
chain sawman; compressor (under 400 cfm); concrete 
finisher tender; concrete processing materials and 
monitors; cutting torch on demolition; drill 
tender; dumpmen; electric drills; fence erectors; 
form line expansion joint assembler; form tamper; 
general laborer; grade checker; handling and 
placing metal mesh, dowel bars, reinforcing bars 
and chairs; hot asphalt laborer; installing 
temporary traffic control devices; jack hammerman; 
mechanical grouter; painter (all except stripers); 
paving breaker; planting trees, shrubs and flowers; 
power broom (not self-propelled); power buggyman; 
rakers; rodman (tying reinforcing steel); 
sandblaster; seeding and mulching; sewer utility 
topman/bottom man; spaders; stressor or 
stretcherman on pre or post tensioned concrete; 
stringman on re/surfacing/no grade control; 
swinging stage, tagline, or block and tackle; 
tampers; timberman; tool room men and checkers; 
tree climber; tree groundman; underpinning and 
shoring caissons over twelve feet deep; vibrators; 
walk behind trencher; walk behind paint stripers; 
walk behind vibrating compactor; water pumps (under 
three inch); work from bosun chair. ZONE 5 (All 
areas of the state not listed)......................$ 23.57                  14.45
LABORER: GROUP B - Air, gas, electric tool 
operator; barco hammer; carpenter tender; caulker; 
chain sawman; compressor (under 400 cfm); concrete 
finisher tender; concrete processing materials and 
monitors; cutting torch on demolition; drill 
tender; dumpmen; electric drills; fence erectors; 
form line expansion joint assembler; form tamper; 
general laborer; grade checker; handling and 
placing metal mesh, dowel bars, reinforcing bars 
and chairs; hot asphalt laborer; installing 
temporary traffic control devices; jack hammerman; 
mechanical grouter; painter (all except stripers); 
paving breaker; planting trees, shrubs and flowers; 
power broom (not self-propelled); power buggyman; 
rakers; rodman (tying reinforcing steel); 
sandblaster; seeding and mulching; sewer utility 
topman/bottom man; spaders; stressor or 
stretcherman on pre or post tensioned concrete; 
stringman on re/surfacing/no grade control; 
swinging stage, tagline, or block and tackle; 
tampers; timberman; tool room men and checkers; 
tree climber; tree groundman; underpinning and 
shoring caissons over twelve feet deep; vibrators; 
walk behind trencher; walk behind paint stripers; 
walk behind vibrating compactor; water pumps (under 
three inch); work from bosun chair. ZONE 4 (Story, 
Black Hawk, Cedar, Jasper, Jones, Jackson, Louisa, 
Madison, and Marion Counties; Clinton County 
(except the City of Clinton), Johnson County, 
Muscatine County (except the City of Muscatine), 
the City of Council Bluffs, Lee County and Des 
Moines County.).....................................$ 23.57                  14.45
LABORER: GROUP C - Scale weigh person; traffic 
control/flagger, surveillance or monitor; water 
carrier. ZONE 4 (Story, Black Hawk, Cedar, Jasper, 
Jones, Jackson, Louisa, Madison, and Marion 
Counties; Clinton County (except the City of 
Clinton), Johnson County, Muscatine County (except 
the City of Muscatine), the City of Council Bluffs, 
Lee County and Des Moines County.)..................$ 21.60                  14.45
LABORER: GROUP C - Scale weigh person; traffic 
control/flagger, surveillance or monitor; water 
carrier. ZONE 5 (All areas of the state not listed).$ 21.60                  14.45
LABORER: GROUP C - Scale weigh person; traffic 
control/flagger, surveillance or monitor; water 
carrier. ZONES 1, 2, & 3 (ZONE 1 The Counties of 
Polk, Warren, and Dallas for all Crafts, and Linn 
County Carpenters only. ZONE 2 The Counties of 
Dubuque for all Crafts and Linn County for all 
Crafts except Carpenters. ZONE 3 The Cities of 
Burlington (including West Burlington), Clinton, 
Fort Madison, Keokuk, and Middleton (including the 
Iowa Army Ammunition Plant) and Muscatine (and 
abutting municipalities of any such cities).........$ 22.25                  14.45
POWER EQUIPMENT OPERATOR: GROUP A -  All terrain 
(off road) forklift; asphalt breakdown roller 
(vibratory); asphalt laydown machine; asphalt 
plant; asphalt screed; bulldozer (finish); central 
mix plant; concrete pump; crane; crawler tractor 
pulling scraper; directional drill (60,000 (lbs) 
pullback and above);  dragline and power shovel; 
dredge engineer; excavator (over 1/2 cu. yd.); 
front end loader (4 cy and over); horizontal boring 
machine; master mechanic; milling machine (over 350 
hp); motor grader (finish); push cat; rubber tired 
backhoe (over 1/2 cu. yd.); scraper (12 cu. yd. and 
over or finish); Self-propelled rotary mixer/road 
reclaimer; sidebroom tractor; slipform portland 
concrete paver; tow or push boat; trenching machine 
(Cleveland 80 or similar) ZONE 5 (All areas of the 
state not listed.)..................................$ 35.32                  17.05
POWER EQUIPMENT OPERATOR: GROUP A -  All terrain 
(off road) forklift; asphalt breakdown roller 
(vibratory); asphalt laydown machine; asphalt 
plant; asphalt screed; bulldozer (finish); central 
mix plant; concrete pump; crane; crawler tractor 
pulling scraper; directional drill (60,000 (lbs) 
pullback and above); dragline and power shovel; 
dredge engineer; excavator (over1/2 cu. yd.); front 
end loader (4 cy and over); horizontal boring 
machine; master mechanic; milling machine (over 350 
hp); motor grader (finish); push cat; rubber tired 
backhoe (over 1/2 cu. yd.); scraper (12 cu. yd. and 
over or finish); Self-propelled rotary mixer/road 
reclaimer; sidebroom tractor; slipform portland 
concrete paver; tow or push boat; trenching machine 
(Cleveland 80 or similar) ZONE 4 (Story, Black 
Hawk, Cedar, Jasper, Jones, Jackson, Louisa, 
Madison, and Marion Counties; Clinton County 
(except the City of Clinton), Johnson County, 
Muscatine County (except the City of Muscatine), 
the City of Council Bluffs, Lee County and Des 
Moines County.).....................................$ 36.50                  22.45
POWER EQUIPMENT OPERATOR: GROUP A -  All terrain 
(off road) forklift; asphalt breakdown roller 
(vibratory); asphalt laydown machine; asphalt 
plant; asphalt screed; bulldozer (finish); central 
mix plant; concrete pump; crane; crawler tractor 
pulling scraper; directional drill (60,000 (lbs) 
pullback and above); dragline and power shovel; 
dredge engineer; excavator (over 1/2 cu. yd.); 
front end loader (4 cy and over); horizontal boring 
machine; master mechanic; milling machine (over 350 
hp); motor grader (finish); push cat; rubber tired 
backhoe (over 1/2 cu. yd.); scraper (12 cu. yd. and 
over or finish); Self-propelled rotary mixer/road 
reclaimer; sidebroom tractor; slipform portland 
concrete paver; tow or push boat; trenching machine 
(Cleveland 80 or similar) ZONE 3 (The Cities of 
Burlington (including West Burlington), Clinton, 
Fort Madison, Keokuk, and Middleton (including the 
Iowa Army Ammunition Plant) and Muscatine (and 
abutting municipalities of any such cities))........$ 36.50                  32.60
POWER EQUIPMENT OPERATOR: GROUP A -  All terrain 
(off road) forklift; asphalt breakdown roller 
(vibratory); asphalt laydown machine; asphalt 
plant; asphalt screed; bulldozer (finish); central 
mix plant; concrete pump; crane; crawler tractor 
pulling scraper; directional drill (60,000 (lbs) 
pullback and above); dragline and power shovel; 
dredge engineer; excavator (over 1/2 cu. yd.); 
front end loader (4 cy and over); horizontal boring 
machine; master mechanic; milling machine (over 350 
hp); motor grader (finish); push cat; rubber tired 
backhoe (over 1/2 cu. yd.); scraper (12 cu. yd. and 
over or finish); Self-propelled rotary mixer/road 
reclaimer; sidebroom tractor; slipform portland 
concrete paver; tow or push boat; trenching machine 
(Cleveland 80 or similar) ZONE 2 (The Counties of 
Dubuque for all Crafts and Linn County for all 
Crafts except Carpenters.)..........................$ 39.82                  19.38
POWER EQUIPMENT OPERATOR: GROUP A -  All terrain 
(off road) forklift; asphalt breakdown roller 
(vibratory); asphalt laydown machine; asphalt 
plant; asphalt screed; bulldozer (finish); central 
mix plant; concrete pump; crane; crawler tractor 
pulling scraper; directional drill (60,000 (lbs) 
pullback and above); dragline and power shovel; 
dredge engineer; excavator (over 1/2 cu. yd.); 
front end loader (4 cy and over); horizontal boring 
machine; master mechanic; milling machine (over 350 
hp); motor grader (finish); push cat; rubber tired 
backhoe (over 1/2 cu. yd.); scraper (12 cu. yd. and 
over or finish); Self-propelled rotary mixer/road 
reclaimer; sidebroom tractor; slipform portland 
concrete paver; tow or push boat; trenching machine 
(Cleveland 80 or similar) ZONE 1 (The Counties of 
Polk, Warren, and Dallas for all  Crafts, and Linn 
County Carpenters only.)............................$ 40.17                  19.38
POWER EQUIPMENT OPERATOR: GROUP B - Articulated off 
road hauler, asphalt heater/planer;  asphalt 
material transfer vehicle; asphalt roller; belt 
loader or similar loader; bulldozer (rough); churn 
or rotary drill; concrete curb machine; crawler 
tractor pulling ripper, disk or roller; deck 
hand/oiler; directional drill (less than 60,000 
(lbs) pullback); distributor; excavator (1/2 cu. 
yd. and under); form riding concrete paver; front 
end loader (2 to less than 4 cu. yd.); group 
equipment greaser; mechanic; milling machine (350 
hp. and less); paving breaker; portland concrete 
dry batch plant; rubber tired backhoe (1/2 cu. yd. 
and under); scraper (under 12 cu. yd.); screening, 
washing and crushing plant (mobile, portable or 
stationary); shoulder machine; skid loader (l cu. 
yd. and over); subgrader or trimmer; trenching 
machine; water wagon on compaction. ZONE 4 (Story, 
Black Hawk, Cedar, Jasper, Jones, Jackson, Louisa, 
Madison, and Marion Counties; Clinton County 
(except the City of Clinton), Johnson County, 
Muscatine County (except the City of Muscatine), 
the City of Council Bluffs, Lee County and Des 
Moines County.).....................................$ 35.36                  22.45
POWER EQUIPMENT OPERATOR: GROUP B - Articulated off 
road hauler, asphalt heater/planer;  asphalt 
material transfer vehicle; asphalt roller; belt 
loader or similar loader; bulldozer (rough); churn 
or rotary drill; concrete curb machine; crawler 
tractor pulling ripper, disk or roller; deck 
hand/oiler; directional drill (less than 60,000 
(lbs) pullback); distributor; excavator (1/2 cu. 
yd. and under); form riding concrete paver; front 
end loader (2 to less than 4 cu. yd.); group 
equipment greaser; mechanic; milling machine (350 
hp. and less); paving breaker; portland concrete 
dry batch plant; rubber tired backhoe (1/2 cu. yd. 
and under); scraper (under 12 cu. yd.); screening, 
washing and crushing plant (mobile, portable or 
stationary); shoulder machine; skid loader (l cu. 
yd. and over); subgrader or trimmer; trenching 
machine; water wagon on compaction. ZONE 2 (The 
Counties of Dubuque for all Crafts and Linn County 
for all Crafts except Carpenters.)..................$ 38.22                  19.38
POWER EQUIPMENT OPERATOR: GROUP B - Articulated off 
road hauler, asphalt heater/planer;  asphalt 
material transfer vehicle; asphalt roller; belt 
loader or similar loader; bulldozer (rough); churn 
or rotary drill; concrete curb machine; crawler 
tractor pulling ripper, disk or roller; deck 
hand/oiler; directional drill (less than 60,000 
(lbs) pullback); distributor; excavator (1/2 cu. 
yd. and under); form riding concrete paver; front 
end loader (2 to less than 4 cu. yd.); group 
equipment greaser; mechanic; milling machine (350 
hp. and less); paving breaker; portland concrete 
dry batch plant; rubber tired backhoe (1/2 cu. yd. 
and under); scraper (under 12 cu. yd.); screening, 
washing and crushing plant (mobile, portable or 
stationary); shoulder machine; skid loader (l cu. 
yd. and over); subgrader or trimmer; trenching 
machine; water wagon on compaction. ZONE 1  (The 
Counties of Polk, Warren, and Dallas for all  
Crafts, and Linn County Carpenters only.)...........$ 38.62                  19.38
POWER EQUIPMENT OPERATOR: GROUP B - Articulated off 
road hauler, asphalt heater/planer; asphalt 
material transfer vehicle; asphalt roller; belt 
loader or similar loader; bulldozer (rough); churn 
or rotary drill; concrete curb machine; crawler 
tractor pulling ripper, disk or roller; deck 
hand/oiler; directional drill (less than 60,000 
(lbs) pullback); distributor; excavator (1/2 cu. 
yd. and under); form riding concrete paver; front 
end loader (2 to less than 4 cu. yd.); group 
equipment greaser; mechanic; milling machine (350 
hp. and less); paving breaker; portland concrete 
dry batch plant; rubber tired backhoe (1/2 cu. yd. 
and under); scraper (under 12 cu. yd.); screening, 
washing and crushing plant (mobile, portable or 
stationary); shoulder machine; skid loader (l cu. 
yd. and over); subgrader or trimmer; trenching 
machine; water wagon on compaction. ZONE 3 (The 
Cities of Burlington (including West Burlington), 
Clinton, Fort Madison, Keokuk, and Middleton 
(including the Iowa Army Ammunition Plant) and 
Muscatine (and abutting municipalities of any such 
cities))............................................$ 35.20                  32.60
POWER EQUIPMENT OPERATOR: GROUP B - Articulated off 
road hauler, asphalt heater/planer; asphalt 
material transfer vehicle; asphalt roller; belt 
loader or similar loader; bulldozer (rough); churn 
or rotary drill; concrete curb machine; crawler 
tractor pulling ripper, disk or roller; deck 
hand/oiler; directional drill (less than 60,000 
(lbs) pullback); distributor; excavator (1/2 cu. 
yd. and under); form riding concrete paver; front 
end loader (2 to less than 4 cu. yd.); group 
equipment greaser; mechanic; milling machine (350 
hp. and less); paving breaker; portland concrete 
dry batch plant; rubber tired backhoe (1/2 cu. yd. 
and under); scraper (under 12 cu. yd.); screening, 
washing and crushing plant (mobile, portable or 
stationary); shoulder machine; skid loader (l cu. 
yd. and over); subgrader or trimmer; trenching 
machine; water wagon on compaction. ZONE 5 (All 
areas of the state not listed.).....................$ 34.28                  17.05
POWER EQUIPMENT OPERATOR: GROUP C - Boom & winch 
truck; concrete spreader/belt placer; deep wells 
for dewatering; farm type tractor (over 75 hp.) 
pulling disc or roller; forklift; front end loader 
(under 2 cu. yd.); motor grader (rough); pile 
hammer power unit; pump (greater than three inch 
diameter); pumps on well points; safety boat; 
self-propelled roller (other than asphalt); 
self-propelled sand blaster or shot blaster, water 
blaster or striping grinder/remover; skid loader 
(under 1 cu. yd.); truck mounted post driver. ZONE 
5 (All areas of the state not listed.)..............$ 32.55                  17.05
POWER EQUIPMENT OPERATOR: GROUP C - Boom & winch 
truck; concrete spreader/belt placer; deep wells 
for dewatering; farm type tractor (over 75 hp.) 
pulling disc or roller; forklift; front end loader 
(under 2 cu. yd.); motor grader (rough); pile 
hammer power unit; pump (greater than three inch 
diameter); pumps on well points; safety boat; 
self-propelled roller (other than asphalt); 
self-propelled sand blaster or shot blaster, water 
blaster or striping grinder/remover; skid loader 
(under 1 cu. yd.); truck mounted post driver. ZONE 
4 (Story, Black Hawk, Cedar, Jasper, Jones, 
Jackson, Louisa, Madison, and Marion Counties; 
Clinton County (except the City of Clinton), 
Johnson County, Muscatine County (except the City 
of Muscatine), the City of Council Bluffs, Lee 
County and Des Moines County.)......................$ 33.03                  22.45
POWER EQUIPMENT OPERATOR: GROUP C - Boom & winch 
truck; concrete spreader/belt placer; deep wells 
for dewatering; farm type tractor (over 75 hp.) 
pulling disc or roller; forklift; front end loader 
(under 2 cu. yd.); motor grader (rough); pile 
hammer power unit; pump (greater than three inch 
diameter); pumps on well points; safety boat; 
self-propelled roller (other than asphalt); 
self-propelled sand blaster or shot blaster, water 
blaster or striping grinder/remover; skid loader 
(under 1 cu. yd.); truck mounted post driver. ZONE 
3 (The Cities of Burlington (including West 
Burlington), Clinton, Fort Madison, Keokuk, and 
Middleton (including the Iowa Army Ammunition 
Plant) and Muscatine (and abutting municipalities 
of any such cities))................................$ 33.70                  32.60
POWER EQUIPMENT OPERATOR: GROUP C - Boom & winch 
truck; concrete spreader/belt placer; deep wells 
for dewatering; farm type tractor (over 75 hp.) 
pulling disc or roller; forklift; front end loader 
(under 2 cu. yd.); motor grader (rough); pile 
hammer power unit; pump (greater than three inch 
diameter); pumps on well points; safety boat; 
self-propelled roller (other than asphalt); 
self-propelled sand blaster or shot blaster, water 
blaster or striping grinder/remover; skid loader 
(under 1 cu. yd.); truck mounted post driver. ZONE 
1  (The Counties of Polk, Warren, and Dallas for 
all  Crafts, and Linn County Carpenters only.)......$ 36.12                  19.38
POWER EQUIPMENT OPERATOR: GROUP C - Boom & winch 
truck; concrete spreader/belt placer; deep wells 
for dewatering; farm type tractor (over 75 hp.) 
pulling disc or roller; forklift; front end loader 
(under 2 cu. yd.); motor grader (rough); pile 
hammer power unit; pump (greater than three inch 
diameter); pumps on well points; safety boat; 
self-propelled roller (other than asphalt); 
self-propelled sand blaster or shot blaster, water 
blaster or striping grinder/remover; skid loader 
(under 1 cu. yd.); truck mounted post driver. ZONE 
2 (The Counties of Dubuque for all Crafts and Linn 
County for all Crafts except Carpenters.)...........$ 35.67                  19.38
POWER EQUIPMENT OPERATOR: GROUP D - Boiler; 
compressor; cure and texture machine; dow box; farm 
type or utility tractor (under 75 hp.) pulling 
disk, roller or other attachments; group greaser 
tender; light plants; mechanic tender; mechanical 
broom; mechanical heaters; oiler; pumps (under 
three inch diameter); tree chipping machine; truck 
crane driver/oiler. ZONE 5 (All areas of the state 
not listed).........................................$ 31.55                  17.05
POWER EQUIPMENT OPERATOR: GROUP D - Boiler; 
compressor; cure and texture machine; dow box; farm 
type or utility tractor (under 75 hp.) pulling 
disk, roller or other attachments; group greaser 
tender; light plants; mechanic tender; mechanical 
broom; mechanical heaters; oiler; pumps (under 
three inch diameter); tree chipping machine; truck 
crane driver/oiler. ZONE 4 (Story, Black Hawk, 
Cedar, Jasper, Jones, Jackson, Louisa, Madison, and 
Marion Counties; Clinton County (except the City of 
Clinton), Johnson County, Muscatine County (except 
the City of Muscatine), the City of Council Bluffs, 
Lee County and Des Moines County.)..................$ 33.03                  22.45
POWER EQUIPMENT OPERATOR: GROUP D - Boiler; 
compressor; cure and texture machine; dow box; farm 
type or utility tractor (under 75 hp.) pulling 
disk, roller or other attachments; group greaser 
tender; light plants; mechanic tender; mechanical 
broom; mechanical heaters; oiler; pumps (under 
three inch diameter); tree chipping machine; truck 
crane driver/oiler. ZONE 3 (The Cities of 
Burlington (including West Burlington), Clinton, 
Fort Madison, Keokuk, and Middleton (including the 
Iowa Army Ammunition Plant) and Muscatine (and 
abutting municipalities of any such cities))........$ 33.70                  32.60
POWER EQUIPMENT OPERATOR: GROUP D - Boiler; 
compressor; cure and texture machine; dow box; farm 
type or utility tractor (under 75 hp.) pulling 
disk, roller or other attachments; group greaser 
tender; light plants; mechanic tender; mechanical 
broom; mechanical heaters; oiler; pumps (under 
three inch diameter); tree chipping machine; truck 
crane driver/oiler. ZONE 2 (The Counties of Dubuque 
for all Crafts and Linn County for all Crafts 
except Carpenters.).................................$ 35.67                  19.38
POWER EQUIPMENT OPERATOR: GROUP D - Boiler; 
compressor; cure and texture machine; dow box; farm 
type or utility tractor (under 75 hp.) pulling 
disk, roller or other attachments; group greaser 
tender; light plants; mechanic tender; mechanical 
broom; mechanical heaters; oiler; pumps (under 
three inch diameter); tree chipping machine; truck 
crane driver/oiler. ZONE 1  (The Counties of Polk, 
Warren, and Dallas for all  Crafts, and Linn County 
Carpenters only.)...................................$ 36.12                  19.38
TRUCK DRIVER (AND PAVEMENT MARKING 
DRIVER/SWITCHPERSON): ZONE 1 (The Counties of Polk, 
Warren, and Dallas for all Crafts, and Linn County 
Carpenters only)....................................$ 30.25                  13.50
TRUCK DRIVER (AND PAVEMENT MARKING 
DRIVER/SWITCHPERSON): ZONE 2 (The Counties of 
Dubuque for all Crafts and Linn County for all 
Crafts except Carpenters)...........................$ 30.25                  13.50
TRUCK DRIVER (AND PAVEMENT MARKING 
DRIVER/SWITCHPERSON): ZONE 3 (The Cities of 
Burlington (including West Burlington), Clinton, 
Fort Madison, Keokuk, and Middleton (including the 
Iowa Army Ammunition Plant) and Muscatine (and 
abutting municipalities of any such cities))........$ 30.25                  13.50
TRUCK DRIVER (AND PAVEMENT MARKING 
DRIVER/SWITCHPERSON): ZONE 4 (Story, Black Hawk, 
Cedar, Jasper, Jones, Jackson, Louisa, Madison, and 
Marion Counties; Clinton County (except the City of 
Clinton), Johnson County, Muscatine County (except 
the City of Muscatine), the City of Council Bluffs, 
Lee County and Des Moines County))..................$ 30.25                  12.00
TRUCK DRIVER (AND PAVEMENT MARKING 
DRIVER/SWITCHPERSON): ZONE 5 (All areas of the 
state not listed)...................................$ 28.41                  12.00
----------------------------------------------------------------

WELDERS - Receive rate prescribed for craft performing
operation to which welding is incidental.

================================================================

Note: Executive Order (EO) 13706, Establishing Paid Sick Leave
for Federal Contractors applies to all contracts subject to the
Davis-Bacon Act for which the contract is awarded (and any
solicitation was issued) on or after January 1, 2017.  If this
contract is covered by the EO, the contractor must provide
employees with 1 hour of paid sick leave for every 30 hours
they work, up to 56 hours of paid sick leave each year.
Employees must be permitted to use paid sick leave for their
own illness, injury or other health-related needs, including
preventive care; to assist a family member (or person who is
like family to the employee) who is ill, injured, or has other
health-related needs, including preventive care; or for reasons
resulting from, or to assist a family member (or person who is
like family to the employee) who is a victim of, domestic
violence, sexual assault, or stalking.  Additional information
on contractor requirements and worker protections under the EO
is available at https://www.dol.gov/agencies/whd/government-contracts.

Note: Executive Order 13658 generally applies to contracts subject to 
the Davis-Bacon Act that were awarded on or between January 1, 
2015 and January 29, 2022, and that have not been renewed or 
extended on or after January 30, 2022. Executive Order 13658 does 
not apply to contracts subject only to the Davis-Bacon Related Acts 
regardless of when they were awarded. If a contract is subject to 
Executive Order 13658, the contractor must pay all covered workers at 
least $13.65 per hour (or the applicable wage rate listed on this wage 
determination, if it is higher) for all hours spent performing on the 
contract from May 11, 2026, through December 31, 2026.  The applicable 
Executive Order minimum wage rate will be adjusted annually.   
Additional information on contractor requirements and worker 
protections under Executive Order 13658 is available at 
www.dol.gov/whd/govcontracts.

Unlisted classifications needed for work not included within
the scope of the classifications listed may be added after
award only as provided in the labor standards contract clauses
(29CFR 5.5 (a) (1) (iii)).


----------------------------------------------------------------

The body of each wage determination lists the classifications
and wage rates that have been found to be prevailing for the
type(s) of construction and geographic area covered by the wage
determination. The classifications are listed in alphabetical
order under rate identifiers indicating whether the particular
rate is a union rate (current union negotiated rate), a survey
rate, a weighted union average rate, a state adopted rate, or a
supplemental classification rate.

Union Rate Identifiers

A four-letter identifier beginning with characters other than
SU, UAVG, SA, or SC denotes that a union rate was
prevailing for that classification in the survey. Example:
PLUM0198-005 07/01/2024. PLUM is an identifier of the union
whose collectively bargained rate prevailed in the survey for
this classification, which in this example would be Plumbers.
0198 indicates the local union number or district council
number where applicable, i.e., Plumbers Local 0198. The next
number, 005 in the example, is an internal number used in
processing the wage determination. The date, 07/01/2024 in the
example, is the effective date of the most current negotiated
rate.

Union prevailing wage rates are updated to reflect all changes
over time that are reported to WHD in the rates
in the collective bargaining agreement (CBA) governing the
classification.

Union Average Rate Identifiers

The UAVG identifier indicates that no single rate prevailed for
those classifications, but that 100% of the data reported for
the classifications reflected union rates. EXAMPLE:
UAVG-OH-0010 01/01/2024. UAVG indicates that the rate is a
weighted union average rate. OH indicates the State of Ohio.
The next number, 0010 in the example, is an internal number
used in producing the wage determination. The date, 01/01/2024
in the example, indicates the date the wage determination was
updated to reflect the most current union average rate.

A UAVG rate will be updated once a year, usually in January, to
reflect a weighted average of the current rates in the
collective bargaining agreements on which the rate is based.

Survey Rate Identifiers

The SU identifier indicates that either a single non-union
rate prevailed (as defined in 29 CFR 1.2) for this
classification in the survey or that the rate was derived by
computing a weighted average rate based on all the rates
reported in the survey for that classification. As a weighted
average rate includes all rates reported in the survey, it may
include both union and non-union rates. Example: SUFL2022-007
6/27/2024. SU indicates the rate is a single non-union
prevailing rate or a weighted average of survey data for that
classification. FL indicates the State of Florida. 2022 is the
year of the survey on which these classifications and rates are
based. The next number, 007 in the example, is an internal
number used in producing the wage determination. The date,
6/27/2024 in the example, indicates the survey completion date
for the classifications and rates under that identifier.

SU wage rates typically remain in effect until a new survey
is conducted. However, the Wage and Hour Division (WHD) has the
discretion to update such rates under 29 CFR 1.6(c)(1).

State Adopted Rate Identifiers

The SA identifier indicates that the classifications and
prevailing wage rates set by a state (or local) government were
adopted under 29 C.F.R 1.3(g)-(h).  Example: SAME2023-007
01/03/2024. SA reflects that the rates are state adopted. ME
refers to the State of Maine. 2023 is the year during which the
state completed the survey on which the listed classifications
and rates are based. The next number, 007 in the example, is an
internal number used in producing the wage determination.
The date, 01/03/2024 in the example, reflects the date on which
the classifications and rates under the ?SA? identifier took
effect under state law in the state from which the rates were
adopted.

-----------------------------------------------------------

WAGE DETERMINATION APPEALS PROCESS

1) Has there been an initial decision in the matter? This can
be:

           a) a survey underlying a wage determination
           b) an existing published wage determination
           c) an initial WHD letter setting forth a position on
               a wage determination matter
          d) an initial conformance (additional classification
              and rate) determination

On survey related matters, initial contact, including requests
for summaries of surveys, should be directed to the WHD Branch
of Wage Surveys. Requests can be submitted via email to
davisbaconinfo@dol.gov or by mail to:

            Branch of Wage Surveys
            Wage and Hour Division
            U.S. Department of Labor
            200 Constitution Avenue, N.W.
            Washington, DC 20210

Regarding any other wage determination matter such as
conformance decisions, requests for initial decisions should be
directed to the WHD Branch of Construction Wage Determinations.
Requests can be submitted via email to BCWD-Office@dol.gov or
by mail to:

            Branch of Construction Wage Determinations
            Wage and Hour Division
            U.S. Department of Labor
            200 Constitution Avenue, N.W.
            Washington, DC 20210

2) If an initial decision has been issued, then any interested
party (those affected by the action) that disagrees with the
decision can request review and reconsideration from the Wage
and Hour Administrator (See 29 CFR Part 1.8 and 29 CFR Part 7).
Requests for review and reconsideration can be submitted via
email to dba.reconsideration@dol.gov or by mail to:

            Wage and Hour Administrator
            U.S. Department of Labor
            200 Constitution Avenue, N.W.
            Washington, DC 20210

The request should be accompanied by a full statement of the
interested party's position and any information (wage payment
data, project description, area practice material, etc.) that
the requestor considers relevant to the issue.

3) If the decision of the Administrator is not favorable, an
interested party may appeal directly to the Administrative
Review Board (formerly the Wage Appeals Board).  Write to:

            Administrative Review Board
            U.S. Department of Labor
            200 Constitution Avenue, N.W.
            Washington, DC 20210.



================================================================

          END OF GENERAL DECISION"

All Iowa determinations: county index · Iowa prevailing wage · compute pay with the calculator.