Parsed from the official text as a reading aid - zone pay, group definitions and footnotes in the full text below modify specific classifications. Identifier prefixes: union-agreement rates carry the local's id, SU marks DOL survey rates (how to read a determination).
Full official text of IL20260065 rev 1
"General Decision Number: IL20260065 05/18/2026
State: Illinois
Construction Types: Residential
Counties: Illinois Counties of
De Kalb
RESIDENTIAL CONSTRUCTION PROJECTS (consisting of single family homes and apartments up
to and including 4 stories)
Modification Number Publication Date
0 01/02/2026
1 05/18/2026
BRIL0021-013 06/01/2017
Rates Fringes
TILE SETTER.........................................$ 45.49 25.72
TERRAZZO WORKER/SETTER..............................$ 44.38 25.84
----------------------------------------------------------------
CARP0790-002 07/01/2025
Rates Fringes
CARPENTER (BATT AND BLOWN INSULATION) (INCLUDES
SOFT FLOOR LAYER)...................................$ 38.40 26.23
----------------------------------------------------------------
ELEC0364-007 06/01/2025
Rates Fringes
ELECTRICIAN (DEKALB COUNTY (EXCEPT SANDWICH TWP))...$ 30.61 28.17
----------------------------------------------------------------
ELEC0461-003 02/03/2025
Rates Fringes
ELECTRICIAN (DE KALB COUNTY (SANDWICH TWP)).........$ 48.98 32.73
----------------------------------------------------------------
ENGI0150-027 06/01/2025
Rates Fringes
OPERATOR: POWER EQUIPMENT: GROUP 4 OILERS;
PREMIUM PAY: LONG BOOM: CRANES & DERRICKS 90'
TO 150' INCLUDING JIB RECEIVE AN EXTRA $.50 PER
HOUR. CRANES & DERRICKS OVER 150' INCLUDING JIB
RECEIVE AN EXTRA $.50 PER HOUR PLUS AN ADDITIONAL
$.10 FOR EACH ADDITIONAL 10' OF BOOM OR JIB.
CAPACITY PAY: CRANES & DERRICKS WITH MAXIMUM
CAPACITY EXCEEDING 50 TON WITH LESS THAN 90' OF
BOOM OR JIB SHALL BE COMPENSATED $.01 PER HOUR FOR
EACH TON OF THE RATED CAPACITY IN EXCESS OF 50 TON.
LONG BOOM PAY AND CAPACITY PAY CANNOT BE
COMBINED. CRANE MOUNTED EARTH AUGER, RAISED AND
BLIND HOLE DRILLS, AND TRUCK MOUNTED DRILL RIGS
RECEIVE AN EXTRA $.50 PER HOUR. CRETER CRANES:
WHEN THE CRETER CRANE IS EQUIPPED WITH A CONVEYOR
SYSTEM CAPABLE OF EXTENDING 70' OR MORE, THE
ENGINEER SHALL RECEIVE AN EXTRA $.50 PER HOUR.
TRUCK MOUNTED CONCRETE PUMPS: WHEN THE TRUCK
MOUNTED CONCRETE PUMP IS EQUIPPED WITH A BOOM,
WHICH IS CAPABLE OF EXTENDING 90' OR MORE, THE
ENGINEER SHALL RECEIVE $.50 PER HOUR EXTRA.........$ 51.60 51.05
OPERATOR: POWER EQUIPMENT: GROUP 3 PUMPS OVER 3""
(1 TO 3 NOT TO EXCEED A TOTAL OF 300 FT); PUMPS,
WELL POINTS; PREMIUM PAY: LONG BOOM: CRANES &
DERRICKS 90' TO 150' INCLUDING JIB RECEIVE AN EXTRA
$.50 PER HOUR. CRANES & DERRICKS OVER 150'
INCLUDING JIB RECEIVE AN EXTRA $.50 PER HOUR PLUS
AN ADDITIONAL $.10 FOR EACH ADDITIONAL 10' OF BOOM
OR JIB. CAPACITY PAY: CRANES & DERRICKS WITH
MAXIMUM CAPACITY EXCEEDING 50 TON WITH LESS THAN
90' OF BOOM OR JIB SHALL BE COMPENSATED $.01 PER
HOUR FOR EACH TON OF THE RATED CAPACITY IN EXCESS
OF 50 TON. LONG BOOM PAY AND CAPACITY PAY CANNOT
BE COMBINED. CRANE MOUNTED EARTH AUGER, RAISED
AND BLIND HOLE DRILLS, AND TRUCK MOUNTED DRILL
RIGS RECEIVE AN EXTRA $.50 PER HOUR. CRETER
CRANES: WHEN THE CRETER CRANE IS EQUIPPED WITH A
CONVEYOR SYSTEM CAPABLE OF EXTENDING 70' OR MORE,
THE ENGINEER SHALL RECEIVE AN EXTRA $.50 PER HOUR.
TRUCK MOUNTED CONCRETE PUMPS: WHEN THE TRUCK
MOUNTED CONCRETE PUMP IS EQUIPPED WITH A BOOM,
WHICH IS CAPABLE OF EXTENDING 90' OR MORE, THE
ENGINEER SHALL RECEIVE $.50 PER HOUR EXTRA.........$ 53.60 51.05
OPERATOR: POWER EQUIPMENT: GROUP 2 BULLDOZERS;
GREASER ENGINEER; FRONT END LOADERS UNDER 2 1/4 CU
YD; ROLLERS; STEAM GENERATORS; TRACTORS; TRACTOR
DRAWN VIBRATORY ROLLER (RECEIVES AN ADDITIONAL $.50
PER HOUR); *-REQUIRES OILER PREMIUM PAY: LONG
BOOM: CRANES & DERRICKS 90' TO 150' INCLUDING JIB
RECEIVE AN EXTRA $.50 PER HOUR. CRANES & DERRICKS
OVER 150' INCLUDING JIB RECEIVE AN EXTRA $.50 PER
HOUR PLUS AN ADDITIONAL $.10 FOR EACH ADDITIONAL
10' OF BOOM OR JIB. CAPACITY PAY: CRANES &
DERRICKS WITH MAXIMUM CAPACITY EXCEEDING 50 TON
WITH LESS THAN 90' OF BOOM OR JIB SHALL BE
COMPENSATED $.01 PER HOUR FOR EACH TON OF THE
RATED CAPACITY IN EXCESS OF 50 TON. LONG BOOM
PAY AND CAPACITY PAY CANNOT BE COMBINED. CRANE
MOUNTED EARTH AUGER, RAISED AND BLIND HOLE DRILLS,
AND TRUCK MOUNTED DRILL RIGS RECEIVE AN EXTRA $.50
PER HOUR. CRETER CRANES: WHEN THE CRETER CRANE
IS EQUIPPED WITH A CONVEYOR SYSTEM CAPABLE OF
EXTENDING 70' OR MORE, THE ENGINEER SHALL RECEIVE
AN EXTRA $.50 PER HOUR. TRUCK MOUNTED CONCRETE
PUMPS: WHEN THE TRUCK MOUNTED CONCRETE PUMP IS
EQUIPPED WITH A BOOM, WHICH IS CAPABLE OF
EXTENDING 90' OR MORE, THE ENGINEER SHALL RECEIVE
$.50 PER HOUR EXTRA.................................$ 56.05 51.05
OPERATOR: POWER EQUIPMENT: GROUP 1 MECHANIC;
AUTOGRADE*; BACKHOES WITH CAISSON ATTACHMENT*:
COMBINATION BACKHOE FRONT ENDLOADER MACHINE;
CONCRETE PAVER OVER 27E CU. FT.*; CONCRETE PAVER
27E CU FT AND UNDER*; CONCRETE PUMP (TRUCK
MOUNTED); CONCRETE TOWER; CRANES*; CRANES,
HAMMERHEAD*; CRANES, (GCI AND SIMILAR TYPE REQUIRES
TWO OPERATORS ONLY); CRETER CRANE; FORMLESS CURB
AND GUTTER MACHINE*; GRADER, ELEVATING; FRONT
ENDLOADER 2 1/4 YD. AND OVER; HYDRAULIC BACKHOES*;
PUMP CRETES DUAL RAM(REQUIRING FREQUENT LUBRICATION
AND WATER); PUMP CRETES; SQUEEZE CRETES- SCREW TYPE
PUMPS GYPSUM BULKER AND PUMP; SCOOPS-TRACTOR DRAWN;
SLIP-FORM PAVER*; TRACTOR WITH BOOM, AND SIDE BOOM;
AND TRENCHING MACHINES*. *-REQUIRES OILER
PREMIUM PAY: LONG BOOM: CRANES & DERRICKS 90'
TO 150' INCLUDING JIB RECEIVE AN EXTRA $.50 PER
HOUR. CRANES & DERRICKS OVER 150' INCLUDING JIB
RECEIVE AN EXTRA $.50 PER HOUR PLUS AN ADDITIONAL
$.10 FOR EACH ADDITIONAL 10' OF BOOM OR JIB.
CAPACITY PAY: CRANES & DERRICKS WITH MAXIMUM
CAPACITY EXCEEDING 50 TON WITH LESS THAN 90' OF
BOOM OR JIB SHALL BE COMPENSATED $.01 PER HOUR FOR
EACH TON OF THE RATED CAPACITY IN EXCESS OF 50 TON.
LONG BOOM PAY AND CAPACITY PAY CANNOT BE
COMBINED. CRANE MOUNTED EARTH AUGER, RAISED AND
BLIND HOLE DRILLS, AND TRUCK MOUNTED DRILL RIGS
RECEIVE AN EXTRA $.50 PER HOUR. CRETER CRANES:
WHEN THE CRETER CRANE IS EQUIPPED WITH A CONVEYOR
SYSTEM CAPABLE OF EXTENDING 70' OR MORE, THE
ENGINEER SHALL RECEIVE AN EXTRA $.50 PER HOUR.
TRUCK MOUNTED CONCRETE PUMPS: WHEN THE TRUCK
MOUNTED CONCRETE PUMP IS EQUIPPED WITH A BOOM,
WHICH IS CAPABLE OF EXTENDING 90' OR MORE, THE
ENGINEER SHALL RECEIVE $.50 PER HOUR EXTRA.........$ 56.75 51.05
----------------------------------------------------------------
LABO0032-008 05/01/2017
Rates Fringes
LABORER (INCLUDING LANDSCAPING).....................$ 19.88 11.87
----------------------------------------------------------------
PAIN0030-014 06/01/2023
Rates Fringes
PAINTER: BRUSH ONLY: INCLUDING DRYWALL FINISHER
(DE KALB COUNTY)....................................$ 51.55 26.68
----------------------------------------------------------------
PLAS0011-009 06/01/2023
Rates Fringes
CEMENT MASON/CONCRETE FINISHER (DE KALB COUNTY).....$ 50.70 40.60
----------------------------------------------------------------
PLUM0501-003 12/01/2013
Rates Fringes
PLUMBER/PIPEFITTER..................................$ 41.20 29.15
----------------------------------------------------------------
ROOF0011-006 12/01/2024
Rates Fringes
ROOFER..............................................$ 50.25 30.43
----------------------------------------------------------------
SHEE0219-002 06/01/2024
Rates Fringes
SHEET METAL WORKER (INCLUNDING HVAC)................$ 39.47 31.55
----------------------------------------------------------------
SUIL1996-001 08/01/1996
Rates Fringes
LABORERS: PLANTSMAN.................................$ 9.00 0.00
----------------------------------------------------------------
TEAM0330-007 06/01/2025
Rates Fringes
TRUCK DRIVER: 6 AXLES FOOTNOTE: A. HEALTH AND
WELFARE $468.00 PER WEEK; PENSION $644.34 PER WEEK
LOW BOY CLASSIFICATION IS AN ADDITIONAL $1.50 PER
HOUR AN ADDITIONAL $.20 PER AXLE SHALL BE PAID FOR
ALL VEHICLES WITH MORE THAN SIX (6) AXLES. PAID
HOLIDAYS: NEW YEAR'S DAY, MEMORIAL DAY,
INDEPENDENCE DAY, LABOR DAY, THANKSGIVING DAY, AND
CHRISTMAS DAY. 900 STRAIGHT TIME HOURS OR MORE
IN 1 CALENDAR YEAR FOR THE SAME EMPLOYER SHALL
RECEIVE 1 WEEK PAID VACATION; 3 YEARS - 2 WEEKS
PAID VACATION; 10 YEARS - 3 WEEKS PAID VACATION; 20
YEARS - 4 WEEKS PAID VACATION.......................$ 45.38 0.30
TRUCK DRIVER: 5 AXLES FOOTNOTE: A. HEALTH AND
WELFARE $468.00 PER WEEK; PENSION $644.34 PER WEEK
LOW BOY CLASSIFICATION IS AN ADDITIONAL $1.50 PER
HOUR AN ADDITIONAL $.20 PER AXLE SHALL BE PAID FOR
ALL VEHICLES WITH MORE THAN SIX (6) AXLES. PAID
HOLIDAYS: NEW YEAR'S DAY, MEMORIAL DAY,
INDEPENDENCE DAY, LABOR DAY, THANKSGIVING DAY, AND
CHRISTMAS DAY. 900 STRAIGHT TIME HOURS OR MORE
IN 1 CALENDAR YEAR FOR THE SAME EMPLOYER SHALL
RECEIVE 1 WEEK PAID VACATION; 3 YEARS - 2 WEEKS
PAID VACATION; 10 YEARS - 3 WEEKS PAID VACATION; 20
YEARS - 4 WEEKS PAID VACATION.......................$ 45.18 0.30
TRUCK DRIVER: 4 AXLES FOOTNOTE: A. HEALTH AND
WELFARE $468.00 PER WEEK; PENSION $644.34 PER WEEK
LOW BOY CLASSIFICATION IS AN ADDITIONAL $1.50 PER
HOUR AN ADDITIONAL $.20 PER AXLE SHALL BE PAID FOR
ALL VEHICLES WITH MORE THAN SIX (6) AXLES. PAID
HOLIDAYS: NEW YEAR'S DAY, MEMORIAL DAY,
INDEPENDENCE DAY, LABOR DAY, THANKSGIVING DAY, AND
CHRISTMAS DAY. 900 STRAIGHT TIME HOURS OR MORE
IN 1 CALENDAR YEAR FOR THE SAME EMPLOYER SHALL
RECEIVE 1 WEEK PAID VACATION; 3 YEARS - 2 WEEKS
PAID VACATION; 10 YEARS - 3 WEEKS PAID VACATION; 20
YEARS - 4 WEEKS PAID VACATION.......................$ 44.98 0.30
TRUCK DRIVER: 2-3 AXLES FOOTNOTE: A. HEALTH
AND WELFARE $468.00 PER WEEK; PENSION $644.34 PER
WEEK LOW BOY CLASSIFICATION IS AN ADDITIONAL
$1.50 PER HOUR AN ADDITIONAL $.20 PER AXLE SHALL
BE PAID FOR ALL VEHICLES WITH MORE THAN SIX (6)
AXLES. PAID HOLIDAYS: NEW YEAR'S DAY, MEMORIAL
DAY, INDEPENDENCE DAY, LABOR DAY, THANKSGIVING DAY,
AND CHRISTMAS DAY. 900 STRAIGHT TIME HOURS OR
MORE IN 1 CALENDAR YEAR FOR THE SAME EMPLOYER SHALL
RECEIVE 1 WEEK PAID VACATION; 3 YEARS - 2 WEEKS
PAID VACATION; 10 YEARS - 3 WEEKS PAID VACATION; 20
YEARS - 4 WEEKS PAID VACATION.......................$ 44.83 0.30
----------------------------------------------------------------
----------------------------------------------------------------------------------------------------
WELDERS - Receive rate prescribed for craft performing
operation to which welding is incidental.
================================================================
Note: Executive Order (EO) 13706, Establishing Paid Sick Leave
for Federal Contractors applies to all contracts subject to the
Davis-Bacon Act for which the contract is awarded (and any
solicitation was issued) on or after January 1, 2017. If this
contract is covered by the EO, the contractor must provide
employees with 1 hour of paid sick leave for every 30 hours
they work, up to 56 hours of paid sick leave each year.
Employees must be permitted to use paid sick leave for their
own illness, injury or other health-related needs, including
preventive care; to assist a family member (or person who is
like family to the employee) who is ill, injured, or has other
health-related needs, including preventive care; or for reasons
resulting from, or to assist a family member (or person who is
like family to the employee) who is a victim of, domestic
violence, sexual assault, or stalking. Additional information
on contractor requirements and worker protections under the EO
is available at
https://www.dol.gov/agencies/whd/government-contracts.
Note: Executive Order 13658 generally applies to contracts subject
to the Davis-Bacon Act that were awarded on or between January 1,
2015 and January 29, 2022, and that have not been renewed or
extended on or after January 30, 2022. Executive Order 13658 does
not apply to contracts subject only to the Davis-Bacon Related Acts
regardless of when they were awarded. If a contract is subject to
Executive Order 13658, the contractor must pay all covered workers
at least $13.65 per hour (or the applicable wage rate listed on this
wage determination, if it is higher) for all hours spent performing on
the contract from May 11, 2026, through December 31, 2026. The
applicable Executive Order minimum wage rate will be adjusted annually.
Additional information on contractor requirements and worker
protections under Executive Order 13658 is available at
www.dol.gov/whd/govcontracts.
Unlisted classifications needed for work not included within
the scope of the classifications listed may be added after
award only as provided in the labor standards contract clauses
(29CFR 5.5 (a) (1) (iii)).
-----------------------------------------------------------------------------------------------------
The body of each wage determination lists the classifications
and wage rates that have been found to be prevailing for the
type(s) of construction and geographic area covered by the wage
determination. The classifications are listed in alphabetical
order under rate identifiers indicating whether the particular
rate is a union rate (current union negotiated rate), a survey
rate, a weighted union average rate, a state adopted rate, or a
supplemental classification rate.
Union Rate Identifiers
A four-letter identifier beginning with characters other than
�SU�, �UAVG�, �SA�, or �SC� denotes that a union rate was
prevailing for that classification in the survey. Example:
PLUM0198-005 07/01/2024. PLUM is an identifier of the union
whose collectively bargained rate prevailed in the survey for
this classification, which in this example would be Plumbers.
0198 indicates the local union number or district council
number where applicable, i.e., Plumbers Local 0198. The next
number, 005 in the example, is an internal number used in
processing the wage determination. The date, 07/01/2024 in the
example, is the effective date of the most current negotiated
rate.
Union prevailing wage rates are updated to reflect all changes
over time that are reported to WHD in the rates
in the collective bargaining agreement (CBA) governing the
classification.
Union Average Rate Identifiers
The UAVG identifier indicates that no single rate prevailed for
those classifications, but that 100% of the data reported for
the classifications reflected union rates. EXAMPLE:
UAVG-OH-0010 01/01/2024. UAVG indicates that the rate is a
weighted union average rate. OH indicates the State of Ohio.
The next number, 0010 in the example, is an internal number
used in producing the wage determination. The date, 01/01/2024
in the example, indicates the date the wage determination was
updated to reflect the most current union average rate.
A UAVG rate will be updated once a year, usually in January, to
reflect a weighted average of the current rates in the
collective bargaining agreements on which the rate is based.
Survey Rate Identifiers
The �SU� identifier indicates that either a single non-union
rate prevailed (as defined in 29 CFR 1.2) for this
classification in the survey or that the rate was derived by
computing a weighted average rate based on all the rates
reported in the survey for that classification. As a weighted
average rate includes all rates reported in the survey, it may
include both union and non-union rates. Example: SUFL2022-007
6/27/2024. SU indicates the rate is a single non-union
prevailing rate or a weighted average of survey data for that
classification. FL indicates the State of Florida. 2022 is the
year of the survey on which these classifications and rates are
based. The next number, 007 in the example, is an internal
number used in producing the wage determination. The date,
6/27/2024 in the example, indicates the survey completion date
for the classifications and rates under that identifier.
�SU� wage rates typically remain in effect until a new survey
is conducted. However, the Wage and Hour Division (WHD) has the
discretion to update such rates under 29 CFR 1.6(c)(1).
State Adopted Rate Identifiers
The �SA� identifier indicates that the classifications and
prevailing wage rates set by a state (or local) government were
adopted under 29 C.F.R 1.3(g)-(h). Example: SAME2023-007
01/03/2024. SA reflects that the rates are state adopted. ME
refers to the State of Maine. 2023 is the year during which the
state completed the survey on which the listed classifications
and rates are based. The next number, 007 in the example, is an
internal number used in producing the wage determination.
The date, 01/03/2024 in the example, reflects the date on which
the classifications and rates under the �SA� identifier took
effect under state law in the state from which the rates were
adopted.
-----------------------------------------------------------------------------------------------------
WAGE DETERMINATION APPEALS PROCESS
1) Has there been an initial decision in the matter? This can
be:
a) a survey underlying a wage determination
b) an existing published wage determination
c) an initial WHD letter setting forth a position on
a wage determination matter
d) an initial conformance (additional classification
and rate) determination
On survey related matters, initial contact, including requests
for summaries of surveys, should be directed to the WHD Branch
of Wage Surveys. Requests can be submitted via email to
davisbaconinfo@dol.gov or by mail to:
Branch of Wage Surveys
Wage and Hour Division
U.S. Department of Labor
200 Constitution Avenue, N.W.
Washington, DC 20210
Regarding any other wage determination matter such as
conformance decisions, requests for initial decisions should be
directed to the WHD Branch of Construction Wage Determinations.
Requests can be submitted via email to BCWD-Office@dol.gov or
by mail to:
Branch of Construction Wage Determinations
Wage and Hour Division
U.S. Department of Labor
200 Constitution Avenue, N.W.
Washington, DC 20210
2) If an initial decision has been issued, then any interested
party (those affected by the action) that disagrees with the
decision can request review and reconsideration from the Wage
and Hour Administrator (See 29 CFR Part 1.8 and 29 CFR Part 7).
Requests for review and reconsideration can be submitted via
email to dba.reconsideration@dol.gov or by mail to:
Wage and Hour Administrator
U.S. Department of Labor
200 Constitution Avenue, N.W.
Washington, DC 20210
The request should be accompanied by a full statement of the
interested party's position and any information (wage payment
data, project description, area practice material, etc.) that
the requestor considers relevant to the issue.
3) If the decision of the Administrator is not favorable, an
interested party may appeal directly to the Administrative
Review Board (formerly the Wage Appeals Board). Write to:
Administrative Review Board
U.S. Department of Labor
200 Constitution Avenue, N.W.
Washington, DC 20210.
================================================================
END OF GENERAL DECISION
"