Wage determination NV20260075

"General Decision Number: NV20260075 07/30/2026


State: Nevada


Construction Types: Heavy


Counties: Nevada Counties of 
Esmeralda




 


Modification Number     Publication Date
          0                06/22/2026
          1                07/30/2026


 SANV2025-001 10/01/2025
                                                     Rates                  Fringes
Air Balance Technician: Journeyman..................$ 59.85                  33.51
Boilermaker: Journeyman.............................$ 76.62                  0.00
Bricklayer: Journeyman..............................$ 56.66                  21.82
Carpenter: Journeyman...............................$ 52.12                  30.90
Carpenter: Welder...................................$ 54.12                  30.90
Cement Mason: Journeyman ...........................$ 55.14                  20.47
Electrician-Communication Technician: 
Communication-Installer/Technician..................$ 40.94                  21.56
Electrician-Lineman/Groundman/Heavy Equipment 
Operator: Heavy Equip Op............................$ 47.60                  20.73
Electrician-Lineman/Groundman/Heavy Equipment 
Operator: Lineman...................................$ 61.67                  22.65
Electrician-Neon Sign: Journeyman...................$ 48.12                  21.56
Electrician-Wireman: Cable Splicer..................$ 59.33                  27.65
Electrician-Wireman: Wireman........................$ 58.83                  27.63
Elevator Constructor: Journeyman Mech...............$ 69.43                  40.04
Fence Erector: Journeyman...........................$ 38.53                  33.59
Flagperson: Journeyman..............................$ 37.03                  33.59
Floorcoverer: Journeyman............................$ 47.82                  20.55
Highway Stripers: Journeyman........................$ 38.53                  33.59
Hod Carrier-Brick Mason Tender: Journeyman .........$ 38.84                  33.59
Laborers: Group 1 (Traffic Control Tech and working 
Traffic Control Supervisor; All pressure washing, 
all surface preparation for patching and grouting, 
dry packing of concrete and filling of form bolt 
holes; Subgrade, finish/fine grade with use of 
granule or non-granule material, vapor barriers, 
lasers, string line, setting and leveling on 
highway, street paving, sidewalk, driveways, 
airport runways and similar type heavy 
construction; Gas and oil pipeline; Guinea chaser; 
Laborer, general, construction, demolition, 
surgical demolition, selective demolition or 
Solar-Stringing of posts, installation of posts and 
piles, installation and bolting together of all 
rakes, tray tables and torque tubes. Running all 
bobcats, skid steers, forklifts, Turchis or similar 
equipment for post installation. Trashing out 
crates, card board boxes and trash within the solar 
arrays and Solar project boundaries.; Laborer, 
packing rod steel and pans; Laborer, temporary 
water lines (portable type); Laborer, loading and 
unloading solar panels, crates and pallets; 
Laborer, handling, Installing, and setting of all 
solar panels/ wire management but not connections 
Landscape gardener (Must have knowledge of plant 
materials and how to plant them. Lays out plant 
arrangements to-follow the landscape plan); Stone 
pavers; Nurseryman; Tarman and mortar man, kettle 
man, potman and man applying asphalt, lay cold 
creosote, fine and similar type materials. 
(""Applying"" means applying, dipping, brushing or 
handling of such materials for pipe wrapping and 
water proofing.); Underground laborer, including 
caisson bellowers; Window cleaner; Scaffold 
Erector- (Excludes Tenders); Fence Erector includes 
but not limited to: erecting or repairing, Chain 
Link, wooden, metal, vinyl, steel, tortoise, wire/ 
wire mesh or temporary fence. Mortarless, Barrier 
Wall and/or Retaining Walls; Digging post holes 
with spade. Post hole digger or power-driven auger; 
Aligning post through the use of lines or by 
sighting; verifying vertical alignment of post with 
a plumb bob or spirit level.; Mechanical Stabilized 
Earth Wall; Material Handler - for all trades, 
including but not limited to stacking and packing 
of all drywall, taping mud, paint, wallpaper, wall 
coverings and material associated there with 
including Demolition of said materials.; All 
Construction cleanup and Final clean-up (picking up 
debris, sweeping, scraping and janitorial work, 
including final clean-up), on all jobsites shall be 
the work of the Laborers, including mass jobsite 
clean-up by All Contractors and Sub-Contractors. 
except as provided in Group 1A; Tool Crib; Light 
Tool Repairman Certified; Firewatch; Rigging and 
signaling when assigned by the Contractor and/or 
performing the work of a Laborer or tending another 
craft)..............................................$ 41.03                  34.24
Laborers: Group 1A (Flagger/flag person; Pilot car; 
Final clean up subject to this rate shall mean: 
Polishing furniture, Polishing stainless steel in 
hotel kitchens, Sweeping and vacuuming hallways and 
finished rooms and completed casino areas, Washing 
windows on first floor and similar duties)..........$ 39.53                  34.24
Laborers: Group 2 (Asphalt raker, ironer, spreader, 
and luteman Buggymobile man; Cesspool digger and 
installer Chuck tender (except tunnels); Gas and 
oil pipeline wrapper, pot tender and form man 
Making and caulking of all non-metallic pipe 
joints; Operators and tenders of pneumatic and 
electric tools, video x-ray, vibrating machines, 
hand propelled trenching machines, vacuum truck/ 
hydro excavation operation, and all associated 
components for its operation, impact wrench 
multi-plate and similar mechanical tools not 
separately classified herein Riprap stonepaver; 
Rota-scraper; Sandblaster (pot tender); Septic tank 
digger and installer (lead man) Tank scaler and 
cleaner; Tree climber, faller, chain saw operator, 
Pittsburgh chipper and similar type brush 
shredders)..........................................$ 41.24                  34.24
Laborers: Group 3 (Cutting torch operator Welding 
in connection with laborers work Gas and oil 
pipeline wrapper; Gas and oil pipeline laborer, 
certified Jackhammer and/or pavement beaker; 
Installing, laying and the connections of all 
metallic and non-metallic pipe, p.v.c. and drop 
inlet and duct bank, including landscape 
sprinklers, sewer pipe, drain pipe and underground 
tile; Cement dumper (on one yard or larger mixers 
and handling bulk cement) Concrete core cutter; 
Concrete curer, impervious membrane and oiler of 
all materials; Concrete saw man, excluding tractor 
type, cutting scoring old or new concrete Operator 
of cement grinding machine; Rock slinger; Scaler 
(using boswain chair or safety belt or power tools 
under 100 feet); Forklift -A journeyman shall hold 
Forklift certification at time of referral for 
duration of employment. Bobcat/skid steer, Gannon 
tractor; Working Dust control monitor, Single Axle 
water and Single Axle Dump Trucks Hodcarrier-Mason 
Tender/Mason Finisher; Decorative Rock Installer - 
(Ponds, Waterfalls, etc.) Concrete striking, 
floating, epoxy finish, self-leveling material, and 
overlay; Shotcrete/Gunnite).........................$ 41.34                  34.24
Laborers: Group 3A (Placement of all concrete, 
including red concrete by any means Concrete 
Specialists; Mudd Cutter; Concrete vibrator 
operator, all sizes; Concrete Dumper; 
Slickline/Hoseman/Dumpman)..........................$ 42.34                  34.24
Laborers: Group 4 (Cribber or shorer, lagging, 
sheeting, trench bracing, hand guided lagging 
hammer head rock slinger; Powderman-blaster, all 
work of loading holes, placing and blasting of all 
powder and explosives if whatever type, regardless 
of method used for such loading and placing; 
Sandblaster (nozzleman) Steel header-board man 
Construction Specialist)............................$ 41.43                  34.24
Laborers: Group 5 (Driller (core, diamond or 
wagon); Air track drill (all types); Joy driller 
model TW-M-2A. Gardner-Denver model DH 143 and 
similar type drills (in accordance with Memorandum 
of Understanding between Laborers and Operating 
Engineers dated Miami, Florida, February 3, 1954); 
Gas and oil pipeline fusion; Gas and oil pipeline 
wrappers, 6"" pipe and over).........................$ 41.53                  34.24
Laborers: Group 6A (Shaft, Raise, Stop Miner).......$ 54.19                  34.24
Laborers: Group 6B (Miner-Tunnel (Hard Rock)........$ 53.69                  34.24
Laborers: Group 6C (Bull Gang, Mucker, Trackman)....$ 53.44                  34.24
Laborers: Group 6D (Miner-Welder)...................$ 54.05                  34.24
Laborers: Group 6E (Tunnel Boring Machine)..........$ 53.69                  34.24
Laborers: Group 6F High Scaler......................$ 60.15                  34.24
Laborers: Group 7 (Asbestos Abatement; Lead 
Abatement; Hazardous Waste Abatement; 
Petro-Chemical Abatement; Radiation Remediation; 
Microbial Remediation; $0.50 wage rate above group 
III when wearing protective suit or respirator; 
Employees shall be properly certified and/or 
licensed at time of dispatch.)......................$ 41.34                  34.24
Laborers: Group 8 (Attending to, handling and 
fueling single diaphragm pumps, insulation pumps, 
plasterer pumps, monocoat pumps, grout pumps; Mason 
finisher; Plaster Tending shall consist of 
preparation of materials and the handling and 
conveying of materials to be used by mechanics of 
other crafts, whether such preparation is by hand 
or any other process. After the material has been 
prepared, tending shall include the supplying and 
conveying of said material and other materials, to 
such mechanic, whether by bucket, hod, wheelbarrow, 
buggy or other motorized unit for such purpose, 
including forklifts.)...............................$ 42.43                  34.24
Mechanical Insulator: Journeyman ...................$ 62.00                  23.53
Millwright: Journeyman .............................$ 48.93                  31.54
Millwright: Welder (certified)(add $3 to Journey 
base)...............................................$ 51.93                  31.54
Operating Engineers: Group 1 (Bargeman; Brakeman; 
Compressor Operator; Ditch Witch, with seat or 
similar type equipment; Elevator Operator inside; 
Engineer Oiler; Forklift Operator (under 5 Tons); 
Generator Operator; Generator, Pump or Compressor 
Plant Operator; Inertial Profiler; Pump Operator; 
Signalman; Steam Cleaner/Pressure Washer; 
Switchman)..........................................$ 60.84                  36.69
Operating Engineers: Group 10 (Backhoe Operator 
(over 5 cu. yds. M.R.C); Drilling Machine Operator, 
Bucket or Auger Types (Calweld 200 B Bucket or 
similar types - Watson 3000 or 5000 Auger or 
similar types - Texoma 900 Auger or similar types - 
drilling depth of 105' maximum); Dual Drum Mixer; 
Heavy Duty Repairman-Welder Combination; Hydraulic 
Casing Oscillator Operator-drilling depth of 105' 
maximum; Monorail Locomotive Operator (diesel, gas 
or electric); Motor Patrol - Blade Operator (single 
engine); Multiple Engine Tractor Operator (Euclid 
and similar type - except Quad 9 Cat.); Pneumatic 
Pipe Ramming Tool and similar types; Pre-Stressed 
Wrapping Machine Operator (2 Operators required); 
Production Tamper - Harsco or similar; Rail Dynamic 
Stabilizer; Rubber-Tired Earth Moving Equipment 
Operator (single engine, over 50 yds. struck); 
Rubber-Tired Earth Moving Equipment Operator 
(multiple engine, Euclid, Caterpillar and similar - 
over 25 yds. and up to 50 yds. struck); Tower Crane 
Repairman; Tractor Loader Operator (crawler and 
wheel-type over 6 and a half yds.); Unmanned 
Aircraft Systems (UAS Drones) Operator (when used 
in conjunction with hoisting and placing materials; 
Welder-Certified; Woods Mixer Operator (and similar 
Pugmill equipment)).................................$ 64.02                  36.69
Operating Engineers: Group 11 (Dynamic Compactor 
LDC350 (or similar types); Heavy Duty 
Repairman-Welder Combination (Multi-Shift); 
Welder-Certified (Multi-Shift)).....................$ 65.12                  36.69
Operating Engineers: Group 12 (Auto Grader 
Operator; Automatic Slip Form Operator; Backhoe 
Operator (over 7 cu. Yds, M.R.S); Drilling Machine 
Operator, Bucket or Auger Types (Calweld, Auger 200 
CA or similar types - Watson, Auger 6000 or similar 
types- Hughes Super Duty, Auger 200 or similar 
types - drilling depth of 175' maximum); Excavator 
Track/Rubber Tired -with all attachments (Operating 
Weight 100,000 lbs. - 200,000 lbs.); Hoe Ram or 
similar with Compressor; Hydraulic Casing 
Oscillator Operator - drilling depth of 175' 
maximum; Mass Excavator Operator - Less than 750 
cu. yds.; Mechanical Finishing Machine Operator; 
Mobile Form Traveler Operator; Motor Patrol 
Operator (multi-engine); Pipe Mobile Machine 
Operator; Rubber-Tired Earth Moving Equipment 
Operator (multiple engine, Euclid, Caterpillar and 
similar type, over 50 cu. yds. struck); 
Rubber-Tired Self-Loading Scraper Operator 
(paddle-wheel-Auger type self-loading - two (2) or 
more units); Vermeer Rock Trencher (or similar 
type))..............................................$ 64.19                  36.69
Operating Engineers: Group 13 (Rubber-Tired Earth 
Moving Equipment Operator, operating equipment with 
the Push-Pull System (single engine, up to and 
including 25 yds. struck))..........................$ 64.29                  36.69
Operating Engineers: Group 14 (Canal Liner Operator 
(not less than four (4) employees - Operator, 
Oiler, Welder, Mechanic, Grade Checker required); 
Canal Trimmer Operator; Drilling machine Operator, 
Bucket or auger Types (Calweld, Auger 200 CA or 
similar types - Watson, August 6000 or similar 
types-Hughes Super Duty, Auger 200 or similar types 
- drilling depth of 300"" maximum); Remote 
Controlled Earth Moving Equipment Operator (no one 
(1) Operator shall operate more than two (2) pieces 
of earth moving equipment at one time - One Dollar 
($1.00) per hour additional to base rate); Wheel 
Excavator Operator (over 750 cu. yds. per hour))....$ 64.32                  36.69
Operating Engineers: Group 15 (Rubber-Tired Earth 
Moving Equipment Operator, operating equipment with 
the Push-Pull System (single engine, Caterpillar, 
Euclid, Athey Wagon, and similar types with any and 
all attachments over 25 yds. and up to and 
including 50 cu. yds. struck); Rubber-Tired Earth 
Moving Equipment Operator, operating equipment with 
the Push-Pull System (multiple engine - up to and 
including 25 yds. struck))..........................$ 64.40                  36.69
Operating Engineers: Group 16 (Excavator 
track/Rubber-Tired-with all attachments (Operating 
Weight exceeding 200,000lbs); Rubber-Tired Earth 
Moving Equipment Operator, operating equipment with 
the Push-Pull System (single engine, over 50 yds. 
struck); Rubber-Tired Earth Moving Equipment 
Operator, operating equipment with the Push-Pull 
System (multiple engine, Euclid, Caterpillar and 
similar, over 25 yds. and up to 50 yds. struck))....$ 64.52                  36.69
Operating Engineers: Group 17 (Rubber-Tired Earth 
Moving Equipment Operator, operating equipment with 
the Push-Pull System (multiple engine, Euclid, 
Caterpillar and similar type, over 50 cu. yds. 
struck); Tandem Tractor Operator (operating crawler 
type tractors in tandem - Quad 9 and similar type)).$ 64.69                  36.69
Operating Engineers: Group 18 (Rubber-Tired Earth 
Moving Equipment Operator, operating in Tandem 
(scrapers, belly dumps, and similar types in any 
combination, excluding compaction units - single 
engine, up to and including 25 yds. struck))........$ 64.79                  36.69
Operating Engineers: Group 19 (Rotex Concrete Belt 
Operator (or similar types); Rubber-Tired Earth 
Moving Equipment Operator, operating in Tandem 
(scrapers, belly dumps, and similar types in any 
combination, including compaction units - single 
engine, Caterpillar, Euclid, Athey Wagon, and 
similar types with any and all attachments over 25 
yds. and up to and including 50 cu. yds. struck); 
Rubber-Tired Earth Moving Equipment Operator, 
operating in Tandem (scrapers, belly dumps, and 
similar types in any combination, excluding 
compaction units - multiple engine, up to and 
including 25 yds. struck))..........................$ 64.90                  36.69
Operating Engineers: Group 2 (Asphalt-Rubber Plant 
Operator (Nurse Tank Operator); Coil Rig Operator; 
Concrete Mixer Operator - Skip type; Conveyor 
Operator; Fireman; Forklift Operator (over 5 Tons); 
Heliostat assembly System (Operator Related Work); 
Hydrostatic Pump Operator; Oiler Crusher (Asphalt 
or Concrete Plant); PJU Side Dump Jack; 
Profilograph;  Screening and Conveyor Machine 
Operator (or similar types); Skiploader (wheel type 
up to 3/4 yd. without attachment); Tar Pot Fireman; 
Temporary Heating Plant Operator; Trenching Machine 
Oiler)..............................................$ 61.79                  36.69
Operating Engineers: Group 20 (Rubber-Tired Earth 
Moving Equipment Operator, operating in Tandem 
(scrapers, belly dumps, and similar types in any 
combination, excluding compaction units - single 
engine, over 50 yds. struck); Rubber-Tired Earth 
Moving Equipment Operator, operating in Tandem 
(scrapers, belly dumps, and similar types in any 
combination, excluding compaction units - multiple 
engine, Euclid, Caterpillar and similar, over 25 
yds. and up to 50 yds. struck)).....................$ 65.02                  36.69
Operating Engineers: Group 21 (Rubber-Tired Earth 
Moving Equipment Operator, operating in Tandem 
(scrapers, belly dumps, and similar types in any 
combination, excluding compaction units - multiple 
engine, Euclid, Caterpillar and similar type, over 
50 cu. yds. struck))................................$ 65.19                  36.69
Operating Engineers: Group 22 (Rubber-Tired Earth 
Moving Equipment Operator, operating equipment with 
the Tandem Push-Pull System (single engine, up to 
and including 25 yds. struck))......................$ 65.29                  36.69
Operating Engineers: Group 23 (Rubber-Tired Earth 
Moving Equipment Operator, operating equipment with 
the Tandem Push-Pull System (single engine, 
Caterpillar, Euclid, Athey Wagon, and similar types 
with any and all attachments over 25 yds. and up to 
and including 50 cu. yds. struck); Rubber-Tired 
Earth Moving Equipment Operator, operating 
equipment with the Tandem Push-Pull System 
(multiple engine, up to and including 25 yds. 
struck))............................................$ 65.40                  36.69
Operating Engineers: Group 24 (Rubber-Tired Earth 
Moving Equipment Operator, operating equipment with 
the Tandem Push-Pull System (single engine, over 50 
yds. struck); Rubber-Tired Earth Moving Equipment 
Operator, operating equipment with the Tandem 
Push-Pull System (multiple engine, Euclid, 
Caterpillar and similar, over 25 yds. & up to 50 
yds. struck)).......................................$ 65.52                  36.69
Operating Engineers: Group 25 (Concrete Pump 
Operator - truck mounted (Oiler required when boom 
over 105' or 36 meters); Pedestal Concrete Pump 
Operator; Rubber-Tired Earth Moving Equipment 
Operator, operating equipment with the Tandem 
Push-Pull System (multiple engine, Euclid, 
Caterpillar and similar type, over 50 cu. yds. 
struck); Spyder Excavator Operator, with all 
attachments)........................................$ 65.69                  36.69
Operating Engineers: Group 3 (Asphalt-Rubber Blend 
Operator; Bobcat or similar type (Skid Steer); 
Equipment Greaser (rack); Ford Ferguson (with 
dragtype attachments); Helicopter Radioman 
(ground); Stationary Pipe Wrapping and Cleaning 
Machine Operator)...................................$ 62.08                  36.69
Operating Engineers: Group 4 (All Terrain 
Placers/All Terrain Stone Slingers; Asphalt Plant 
Fireman; Backhoe Operator (Mini-Max or similar 
type); Boring Machine and/or pilot Tube Machine 
Operator; Boring System Electronic Tracking 
Locator; Boxman or Mixerman (Asphalt or Concrete); 
Chip Spreading Machine Operator; Concrete Cleaning 
Decontamination Machine Operator; Concrete Pump 
Operator (small portable); Direct Push Operator 
(Geoprobe or similar types); Drilling Machine 
Operator, Small Auger Types (Texoma Super 
Economatic, or similar types - Hughes 100 or 200, 
or similar types - drilling depth of 30' maximum); 
Equipment Greaser (Grease Truck); Excavator 
Track/Rubber-Tired-wth all attachments (Operating 
weight under 21,000lbs); Guard Rail Post Driver 
Operator; Highline Cableway Signalman; Horizontal 
Directional Drilling Machine; Hydraulic Casing 
Oscillator Operator-drilling depth of 30'maximum; 
Hydrovac Operator; Hydra-Hammer-Aero Stamper; Micro 
Tunneling (above ground tunnel); Power Concrete 
Curing Machine Operator; Power Concrete Saw 
Operator; Power - Driven Jumbo Form Setter 
Operator; Power Sweeper Operator; Rock Wheel 
Saw/Trencher; Roller Operator (compacting); Screed 
Operator (Asphalt or Concrete); Trenching Machine 
Operator (up to 6 ft.); Vacuum or Muck Truck).......$ 63.57                  36.69
Operating Engineers: Group 5 (Equipment Greaser 
(Grease Truck/Multi-Shift)).........................$ 64.67                  36.69
Operating Engineers: Group 6 (Articulating Material 
Hauler; Asphalt Plant Engineer; Batch Plant 
Operator; Bit Sharpener; Concrete Joint Machine 
Operator (canal and similar type); Concrete Placer 
Operator; Concrete Planer; Dandy Digger; Deck 
Engine Operator; Deck Engineer; Derrickman 
(Oilfield type); DeSanding Plant Operator; Drilling 
Machine Operator, Bucket or Auger Types (Calweld 
100 Bucket or similar types - Watson 1000 Auger or 
similar types - Texoma 330, 500 or 600 Auger or 
similar types - drilling depth of 45' maximum); 
Drilling Machine Operator (including water wells); 
Force Feed Loader; High Rail Swivel Dump; Hydraulic 
Casing Oscillator Operator; Hydro Seeder Machine 
Operator (straw, pulp or seed); Jackson Track 
Maintainer, or similar type; Machine Tool Operator; 
Maginnis Internal Full Slab Vibrator; Mechanical 
Berm, curb or gutter (concrete or asphalt); 
Mechanical Finisher Operator (concrete, 
Clary-Johnson-Bidwell or similar); Micro Tunnel 
System (below ground); MST 2200, Track Dumps; 
Pavement Breaker Operator (truck mounted); Prentice 
High Rail Loader; Railcar Mover; Road Oil Mixing 
Machine Operator; Roller Operator (asphalt or 
finish); Rubber-Tired Earth Moving Equipment 
(single engine, up to and including 25 yds. 
struck); Self-Propelled Tar Pipelining Machine 
Operator; Rumble Strip Grinder; Skiploader Operator 
(crawler and wheel type, over 3/4yd. and up to and 
including 1 1/2 yds.); Slip Form Pump Operator 
(power driven hydraulic lifting device for concrete 
forms); Tractor Operator - Bulldozer, 
Tamper-Scraper (single engine, up to 100 h.p. 
flywheel and similar types, up to and including D-5 
and similar types); Tugger Hoist Operator (1 drum); 
Ultra High-Pressure Waterjet Cutting Tool System 
Operator; Vacuum Blasting Machine Operator; 
Volumetric Mixer Operator; Welder - General)........$ 63.79                  36.69
Operating Engineers: Group 7 (Welder - General 
(Multi-Shift))......................................$ 64.89                  36.69
Operating Engineers: Group 8 (Allroad Mobile Timber 
Harvester (Albach or similar types); Asphalt or 
Concrete Spreading Operator (Tamping or Finishing); 
Asphalt Paving Machine Operator (Barber Greene or 
similar type); Asphalt-Rubber Distributor Operator; 
Backhoe Operator (up to and including 3/4 yd.) 
Small Ford, Case or similar.; Backhoe Operator 
(over  3/4 yd. and up to 5 cu. yd. M.R.C); Barrier 
Rail mover; Cable Bundling Machine Operator; Cable 
Trenching Machine Operator (Spider Plow or similar 
types); Cast in Place Pipe Laying Machine Operator; 
Cold Foamed Asphalt Recycler; Combination Mixer and 
Compressor Operator (Gunite Work); Compactor 
Operator - self propelled; Concrete Mixer Operator 
� Paving; Crushing Plant Operator (Non-Portable); 
Drill Doctor; Drilling Machine Operator, Bucket or 
Auger Types (Calweld 150 Bucket or similar types - 
Watson 1500, 2000, 2500 Auger or similar types - 
Texoma 700, 800 Auger or similar types - drilling 
depth of 60' maximum); Elevating Grader Operator; 
Excavator Track/Rubber-Tired- with all attachments 
(operating Weight 21,000 lbs-1000,000 lbs.; Global 
Positioning Systems/GPS; Grade Checker; Gradall 
Operator; Grouting Machine Operator; Heavy Duty 
Repairman; Heavy Equipment Robotics Operator; 
Hydraulic Casing oscillator Operator-drilling depth 
of 60' maximum; Hydraulic Operated-drilling depth 
of 60"" maximum; Hydraulic Operated Grout Plant 
(excludes hand loading); Kalamazoo Ballast 
Regulator or similar type; Kalamazoo Switch Tamper, 
or similar type; Klemm drill Operator or similar 
types; Kolman Belt Loader and similar type; Le 
Tourneau Blob Compactor or similar type; Lo Drill; 
Loader Operator (Athey, Euclid, Sierra and similar 
types); Master Environmental Maintenance Mechanic; 
Mobark Chipper or similar types; Ozzie Padder or 
similar types; PC 490 Slot Saw; Pneumatic Concrete 
Placing Machine Operator (Hackley-Presswell or 
similar type); Portable Crushing Plant Operator; 
Prentice 721E Hydro-Ax; Pumpcrete Gun Operator; RCM 
Cementing Unit Operator; Rail/Switch Grinder 
Operator (Harsco or similar types); Rail Tie Crane 
(Kershaw or similar type); Rock Drill or similar 
types; Rotary Drill Operator (excluding Caison 
type); Rota Mill Operator; Rubber-Tired Earth 
Moving Equipment Operator (single engine, 
Caterpillar, Euclid, Athey Wagon, and similar types 
with any and all attachments over 25 yds. and up to 
and including 50 cu. yds. struck); Rubber-Tired 
Earth Moving Equipment Operator (multiple engine - 
up to and including 25 yds. struck); Rubber-Tired 
Scraper Operator (self-loading paddle wheel type - 
John Deere, 1040 and similar single unit); 
Self-Propelled Curb and Gutter Machine Operator; 
Shuttle Buggy; Skiploader Operator (crawler and 
wheel type over 1 1/2 yds. up to and including 6 
1/2 yds.); Soil Remediation Plant Operator (C.M.I. 
Enviro Tech Thermal or Similar Types) (Oiler 
Required Group 11); Soil Stabilizer and Reclaimer; 
Surface Heaters and Planer Operator; Somero SXP 
Laser screed; Speed Swing Operator; Spike Driver 
(Nordea Hammer or similar types); Surface Heaters 
and Planer Operator; Tie Adzer; Track Spike Puller 
Machine Operator (Nordea or similar types); Tractor 
Compressor Drill Combination Operator; Tractor 
Operator (any type larger than D-5 - 100 flywheel 
h.p. and over, or similar - Bulldozer, Tamper, 
Scraper and Push Tractor, single engine); Tractor 
Operator (boom attachments); Traveling Pipe 
Wrapping, Cleaning and Bending Machine Operator; 
Trenching Machine Operator (over 6 ft. depth 
capacity, manufacturer's rating); Trenching Machine 
with Road Miner Attachment (over 6 ft. depth 
capacity, manufacturer's rating); Ultra 
High-Pressure Waterjet Cutting Tool System 
Mechanic; Water Pull (compaction))..................$ 63.90                  36.69
Operating Engineers: Group 9 (Heavy Duty Repairman 
(Multi-Shift))......................................$ 65.00                  36.69
Operating Engineers-Piledriver & Hoisting 
Equipment: Group 1 (A-Frame or Winch Truck 
Operator; Ross Carrier Operator (jobsite))..........$ 63.43                  36.69
Operating Engineers-Piledriver & Hoisting 
Equipment: Group 10 (ABI/Fundex Machine; Derrick 
Barge Operator (over 50 tons, up to and including 
100-ton M.R.C); Hoist Operator, Stiff Legs, Guy 
Derrick or similar type (over 50 tons, up to and 
including 100-ton M.R.C); Vibrocat Stone Column 
Operator or similar types)..........................$ 65.36                  36.69
Operating Engineers-Piledriver & Hoisting 
Equipment: Group 11 (Crane Heavy Duty Repairman)....$ 65.66                  36.69
Operating Engineers-Piledriver & Hoisting 
Equipment: Group 12 (Crane Operator (up to and 
including 40-ton capacity)).........................$ 65.99                  36.69
Operating Engineers-Piledriver & Hoisting 
Equipment: Group 13 (Derrick Barge Operator (over 
100 tons, up to and including 200-ton M.R.C.); 
Hoist Operator, Stiff Legs, Guy Derrick or similar 
type (over 100 tons, up to and including 200-ton 
M.R.C)).............................................$ 66.36                  36.69
Operating Engineers-Piledriver & Hoisting 
Equipment: Group 14 (Luffing Boom Oiler)............$ 67.20                  36.69
Operating Engineers-Piledriver & Hoisting 
Equipment: Group 15 (Derrick Barge Operator (over 
200 tons, up to and including 300-ton M.R.C.); 
Hoist Operator, Stiff Legs, Guy Derrick or similar 
type (over 200 tons, up to and including 300-ton 
M.R.C.))............................................$ 67.36                  36.69
Operating Engineers-Piledriver & Hoisting 
Equipment: Group 16 (Crane Operator (over 40 tons, 
up to and including 79-ton M.R.C.)).................$ 67.41                  36.69
Operating Engineers-Piledriver & Hoisting 
Equipment: Group 17 (Crane Operator (over 80 Tons, 
up to and including 150-ton M.R.C.))................$ 67.91                  36.69
Operating Engineers-Piledriver & Hoisting 
Equipment: Group 18 (Derrick Barge Operator (over 
300 tons); Helicopter Pilot; Hoist Operator, Stiff 
Legs, Guy Derrick or similar type (over 300 tons); 
Tower Crane Operator (over 300 tons))...............$ 68.36                  36.69
Operating Engineers-Piledriver & Hoisting 
Equipment: Group 19 (Crane Operator (over 150 tons, 
up to and including 200-ton M.R.C.))................$ 69.94                  36.69
Operating Engineers-Piledriver & Hoisting 
Equipment: Group 2 (Bridge-Type Unloader and 
Turntable Operator; Helicopter Hoist Operator)......$ 63.57                  36.69
Operating Engineers-Piledriver & Hoisting 
Equipment: Group 20 (Crane Operator (over 200 tons, 
up to and including 250-ton M.R.C.))................$ 70.55                  36.69
Operating Engineers-Piledriver & Hoisting 
Equipment: Group 21 (Crane Operator (over 200 tons, 
up to and including 250-ton M.R.C.))................$ 71.16                  36.69
Operating Engineers-Piledriver & Hoisting 
Equipment: Group 22 (Crane Operator (over 300 tons, 
up to and including 350-ton M.R.C.))................$ 71.92                  36.69
Operating Engineers-Piledriver & Hoisting 
Equipment: Group 23 (Crane Operator (over 350 tons, 
up to and including 500-ton M.R.C.))................$ 72.38                  36.69
Operating Engineers-Piledriver & Hoisting 
Equipment: Group 24 (Crane Operator (over 500 tons 
M.R.C.))............................................$ 72.88                  36.69
Operating Engineers-Piledriver & Hoisting 
Equipment: Group 3 (Hydraulic Boom Truck (Pitman); 
Knuckleboom; Spyder Crane (or similar type); 
Stinger Crane (Austin-Western or similar type); 
Tugger Hoist Operator (1 drum)).....................$ 63.79                  36.69
Operating Engineers-Piledriver & Hoisting 
Equipment: Group 4 (Bridge Crane Operator; Creter 
Crane Operator; Hoist Operator (Chicago Boom and 
similar type); Lift Mobile Operator; Lift Slab 
Machine Operator (Vagtborg and similar types); 
Material Hoist/Manlift Operator; Ojjo Earth Truss 
Driver Machine Operator or similar types; PD10 Pile 
driver (or similar types); Polar Gantry Crane 
Operator; Prentice Self-Loader; Self-Climbing 
Scaffold (or similar type); Shovel, Dragline, 
Clamshell Operator (over 3/4 yd. and up to 5 cu. 
yds. M.R.C.); Silent Piler (Giken or similar 
types); Snobble Unit (pin-n-go or similar type); 
Tugger Hoist Operator (2 drum)).....................$ 63.90                  36.69
Operating Engineers-Piledriver & Hoisting 
Equipment: Group 5 (Pedestal Crane Operator; 
Shovel, Dragline, Clamshell Operator (over 5 cu. 
yds. M.R.C.); Tower Crane Repairman; Tugger Hoist 
Operator (3 drum))..................................$ 64.02                  36.69
Operating Engineers-Piledriver & Hoisting 
Equipment: Group 6 (Crawler Transporter Operator 
(Track or Rubber-Tired, Goldhofer or similar type); 
Derrick Barge Operator (under 25 tons, up to and 
including 50 tons M.R.C.); Hoist Operator, Stiff 
Legs, Guy Derrick or similar type (up to and 
including 25 ton M.R.C.); Shovel, Dragline, 
Clamshell Operator (over 7 cu. yds. M.R.C.); Timber 
Handler - Sennebogen or similar types (tree 
hoisting/removal/site clearing); Rotational 
Telehandler Operator (when Crane Certification is 
required); Self-Propelled Modular Transporter 
(Schuerle, Goldhofer or similar types)).............$ 64.19                  36.69
Operating Engineers-Piledriver & Hoisting 
Equipment: Group 7 (Derrick Barge Operator (over 25 
tons, up to and including 50-ton M.R.C.); Highline 
Cableway Operator; Hoist Operator, Stiff Legs, Guy 
Derrick or similar type (over 25 tons, up to and 
including 50-ton M.R.C.); K-Crane; Polar Crane 
Operator; Self-Erecting Tower Crane Operator 
Maximum Lifting Capacity ten (10) tons. One (1) ton 
operator))..........................................$ 64.36                  36.69
Operating Engineers-Piledriver & Hoisting 
Equipment: Group 8 (Oiler (40 tons up to including 
200 tons M.R.C))....................................$ 64.52                  36.69
Operating Engineers-Piledriver & Hoisting 
Equipment: Group 9 (Oiler (Over 200 tons))..........$ 65.20                  36.69
Operating Engineers-Tunnel: Group 2 (Skiploader 
(wheel type up to 3/4 yd. without attachment))......$ 63.64                  36.69
Operating Engineers-Tunnel: Group 3 (Chainman; 
Power - Driver Jumbo Form Setter Operator)..........$ 63.93                  36.69
Operating Engineers-Tunnel: Group 4 (Dinkey 
Locomotive or Motorman (up to and including 10 
tons); Rodman)......................................$ 64.07                  36.69
Operating Engineers-Tunnel: Group 5 (Bit Sharpener; 
Equipment Greaser (Grease Truck); Multi Service 
Vehicle (MSV) Operator; Slip Form Pump Operator 
(power driven hydraulic lifting device for concrete 
forms); Tugger Hoist Operator (1 drum); Tunnel 
Locomotive Operator (over 10 and up to and 
including 30 tons); Welder - General)...............$ 64.29                  36.69
Operating Engineers-Tunnel: Group 6 (Backhoe 
Operator (up to and including 3/4 yd.) Small Ford, 
Case or similar types; Drill Doctor; Grouting 
Machine Operator; Heading Shield Operator; Heavy 
Duty Repairman; Jumbo Pipe Carrier; Loader Operator 
(Athey, Euclid, Sierra and similar types); Mucking 
Machine Operator (1/4 yd.); Pneumatic Concrete 
Placing Machine Operator (Hackley-Presswell or 
similar type); Pneumatic Heading Shield (tunnel); 
Pumpcrete Gun Operator; Tractor Compressor Drill 
Combination Operator; Tugger Hoist Operator (2 
drum); Tunnel Locomotive Operator (over 30 tons))...$ 64.40                  36.69
Operating Engineers-Tunnel: Group 7 (Heavy Duty 
Repairman-Welder Combination).......................$ 64.52                  36.69
Operating Engineers-Tunnel: Group 9 (Tunnel Mole 
Boring Machine Operator)............................$ 64.82                  36.69
Piledriver: Certified Welder........................$ 53.32                  30.90
Piledriver: Diver-Diving (Wet Pay)..................$ 117.10                  30.90
Piledriver: Driverman...............................$ 52.32                  30.90
Piledriver: Stand By Diver..........................$ 58.55                  30.90
Piledriver: Tender..................................$ 57.55                  30.90
Plumber/Pipefitter: Journeyman .....................$ 60.00                  27.43
Tile, Terrazzo, Marble: Finisher....................$ 39.49                  15.18
Tile, Terrazzo, Marble: Terrazzo/Marble Mason.......$ 54.92                  19.27
Tile, Terrazzo, Marble: Tile Setter.................$ 52.23                  19.21
Traffic Barrier Erector: Traffic Barrier Erector....$ 38.53                  33.59
Truck Driver: Truck Driver..........................$ 65.52                  0.00
Well Driller: Well Driller..........................$ 60.78                  0.00
----------------------------------------------------------------

----------------------------------------------------------------------------------------------------
WELDERS - Receive rate prescribed for craft performing
operation to which welding is incidental.
================================================================
Note: Executive Order (EO) 13706, Establishing Paid Sick Leave
for Federal Contractors applies to all contracts subject to the
Davis-Bacon Act for which the contract is awarded (and any
solicitation was issued) on or after January 1, 2017.  If this
contract is covered by the EO, the contractor must provide
employees with 1 hour of paid sick leave for every 30 hours
they work, up to 56 hours of paid sick leave each year.
Employees must be permitted to use paid sick leave for their
own illness, injury or other health-related needs, including
preventive care; to assist a family member (or person who is
like family to the employee) who is ill, injured, or has other
health-related needs, including preventive care; or for reasons
resulting from, or to assist a family member (or person who is
like family to the employee) who is a victim of, domestic
violence, sexual assault, or stalking.  Additional information
on contractor requirements and worker protections under the EO
is available at
https://www.dol.gov/agencies/whd/government-contracts.

Note: Executive Order 13658 generally applies to contracts subject 
to the Davis-Bacon Act that were awarded on or between January 1, 
2015 and January 29, 2022, and that have not been renewed or 
extended on or after January 30, 2022. Executive Order 13658 does 
not apply to contracts subject only to the Davis-Bacon Related Acts 
regardless of when they were awarded. If a contract is subject to 
Executive Order 13658, the contractor must pay all covered workers 
at least $13.65 per hour (or the applicable wage rate listed on this 
wage determination, if it is higher) for all hours spent performing on 
the contract from May 11, 2026, through December 31, 2026.  The 
applicable Executive Order minimum wage rate will be adjusted annually.
Additional information on contractor requirements and worker 
protections under Executive Order 13658 is available at 
www.dol.gov/whd/govcontracts.

Unlisted classifications needed for work not included within
the scope of the classifications listed may be added after
award only as provided in the labor standards contract clauses
(29CFR 5.5 (a) (1) (iii)).
-----------------------------------------------------------------------------------------------------
The body of each wage determination lists the classifications
and wage rates that have been found to be prevailing for the
type(s) of construction and geographic area covered by the wage
determination. The classifications are listed in alphabetical
order under rate identifiers indicating whether the particular
rate is a union rate (current union negotiated rate), a survey
rate, a weighted union average rate, a state adopted rate, or a
supplemental classification rate.

Union Rate Identifiers

A four-letter identifier beginning with characters other than
�SU�, �UAVG�, �SA�, or �SC� denotes that a union rate was
prevailing for that classification in the survey. Example:
PLUM0198-005 07/01/2024. PLUM is an identifier of the union
whose collectively bargained rate prevailed in the survey for
this classification, which in this example would be Plumbers.
0198 indicates the local union number or district council
number where applicable, i.e., Plumbers Local 0198. The next
number, 005 in the example, is an internal number used in
processing the wage determination. The date, 07/01/2024 in the
example, is the effective date of the most current negotiated
rate.

Union prevailing wage rates are updated to reflect all changes
over time that are reported to WHD in the rates
in the collective bargaining agreement (CBA) governing the
classification.

Union Average Rate Identifiers

The UAVG identifier indicates that no single rate prevailed for
those classifications, but that 100% of the data reported for
the classifications reflected union rates. EXAMPLE:
UAVG-OH-0010 01/01/2024. UAVG indicates that the rate is a
weighted union average rate. OH indicates the State of Ohio.
The next number, 0010 in the example, is an internal number
used in producing the wage determination. The date, 01/01/2024
in the example, indicates the date the wage determination was
updated to reflect the most current union average rate.

A UAVG rate will be updated once a year, usually in January, to
reflect a weighted average of the current rates in the
collective bargaining agreements on which the rate is based.

Survey Rate Identifiers

The �SU� identifier indicates that either a single non-union
rate prevailed (as defined in 29 CFR 1.2) for this
classification in the survey or that the rate was derived by
computing a weighted average rate based on all the rates
reported in the survey for that classification. As a weighted
average rate includes all rates reported in the survey, it may
include both union and non-union rates. Example: SUFL2022-007
6/27/2024. SU indicates the rate is a single non-union
prevailing rate or a weighted average of survey data for that
classification. FL indicates the State of Florida. 2022 is the
year of the survey on which these classifications and rates are
based. The next number, 007 in the example, is an internal
number used in producing the wage determination. The date,
6/27/2024 in the example, indicates the survey completion date
for the classifications and rates under that identifier.

�SU� wage rates typically remain in effect until a new survey
is conducted. However, the Wage and Hour Division (WHD) has the
discretion to update such rates under 29 CFR 1.6(c)(1).

State Adopted Rate Identifiers

The �SA� identifier indicates that the classifications and
prevailing wage rates set by a state (or local) government were
adopted under 29 C.F.R 1.3(g)-(h).  Example: SAME2023-007
01/03/2024. SA reflects that the rates are state adopted. ME
refers to the State of Maine. 2023 is the year during which the
state completed the survey on which the listed classifications
and rates are based. The next number, 007 in the example, is an
internal number used in producing the wage determination.
The date, 01/03/2024 in the example, reflects the date on which
the classifications and rates under the �SA� identifier took
effect under state law in the state from which the rates were
adopted.
-----------------------------------------------------------------------------------------------------
WAGE DETERMINATION APPEALS PROCESS
1) Has there been an initial decision in the matter? This can
be:
           a) a survey underlying a wage determination
           b) an existing published wage determination
           c) an initial WHD letter setting forth a position on
                a wage determination matter
           d) an initial conformance (additional classification
                and rate) determination
On survey related matters, initial contact, including requests
for summaries of surveys, should be directed to the WHD Branch
of Wage Surveys. Requests can be submitted via email to
davisbaconinfo@dol.gov or by mail to:
            Branch of Wage Surveys
            Wage and Hour Division
            U.S. Department of Labor
            200 Constitution Avenue, N.W.
            Washington, DC 20210
Regarding any other wage determination matter such as
conformance decisions, requests for initial decisions should be
directed to the WHD Branch of Construction Wage Determinations.
Requests can be submitted via email to BCWD-Office@dol.gov or
by mail to:
            Branch of Construction Wage Determinations
            Wage and Hour Division
            U.S. Department of Labor
            200 Constitution Avenue, N.W.
            Washington, DC 20210
2) If an initial decision has been issued, then any interested
party (those affected by the action) that disagrees with the
decision can request review and reconsideration from the Wage
and Hour Administrator (See 29 CFR Part 1.8 and 29 CFR Part 7).
Requests for review and reconsideration can be submitted via
email to dba.reconsideration@dol.gov or by mail to:
            Wage and Hour Administrator
            U.S. Department of Labor
            200 Constitution Avenue, N.W.
            Washington, DC 20210
The request should be accompanied by a full statement of the
interested party's position and any information (wage payment
data, project description, area practice material, etc.) that
the requestor considers relevant to the issue.

3) If the decision of the Administrator is not favorable, an
interested party may appeal directly to the Administrative
Review Board (formerly the Wage Appeals Board).  Write to:
            Administrative Review Board
            U.S. Department of Labor
            200 Constitution Avenue, N.W.
            Washington, DC 20210.
================================================================
          END OF GENERAL DECISION
"