Wage determination WA20260002

"General Decision Number: WA20260002 05/20/2026


State: Washington


Construction Types: Building, Heavy and Highway


Counties: Washington Counties of 
Benton and Franklin




D.O.E. Hanford Site Only 


Modification Number     Publication Date
          0                01/02/2026
          1                05/18/2026
          2                05/20/2026


 SUWA2001-001 09/03/2001
                                                     Rates                  Fringes
TRUCK DRIVER: GROUP 8  Lowboy, over 50 tons; Prime 
movers & stinger truck; Transit Mixers and truck 
hauling concrete, over 20 yards; Trucks, side, end 
bottom and articulated end dump, over 100 yards.....$ 37.88                  21.81
TRUCK DRIVER: GROUP 7  Dumps, semi-end; Flagerty 
Spreader Box Driver; Flowboys; Fork lift, 16,000 
lbs and over; Lowboy, 50 tons and under; Mechanic, 
Field; Oil Distributors Driver (road, bootperson, 
leverperson); and Oil Tank Driver; Self-Loading 
Roll Off and Dumpster over 6 yds; Stringer Truck 
(cable operated trailer); Tractor with Steer 
Trailer; Transfer Truck & Trailer; Transit Mixers & 
Truck Hauling Concrete: over 6 yards to and 
including 20 yards; Truck & Pup; Trucks, side, end, 
bottom, & articulated end dump: over 12 yards to 
and including 100 yards; Truck Mounted Crane (with 
load-bearing surface, either mounted or pulled) up 
to 14 tons; Turnarocker, DWs & similar, with 2 or 
or more 4 wheel-power tractor with trailer, 
gallonage or yardage scale, whichever is greater; 
Vacuum truck (super sucker, guzzler, etc.); Water 
Tank Truck, 8,001 to 14,000; Semi-truck and 
Trailer, 50 tons and under Lowboy...................$ 37.56                  21.81
TRUCK DRIVER: GROUP 6  A-Frame; Service Greaser; 
Tireperson; Truck, side, end, and bottom & 
articulated end dump (up to and including 12 yds); 
Water Tank Truck, 4001 to 8000 gallons, 
Warehouseperson, to include shipping and receiving..$ 37.22                  21.81
TRUCK DRIVER: GROUP 5  Auto Crane, 2000 lbs 
capacity; Dumptor (6 yds and under); Flat Bed Truck 
(with hydraulic system); Fork Lift (3001-16,000 
lbs); Fuel Truck Driver, steam cleaner and washer; 
Rubber-tired Tunnel Jumbo; Scissors Truck; Slurry 
Truck Driver; Transite Mixers & mixers hauling 
concrete 3 yd to and including 6 yd.; Wrecker and 
Tow Trucks..........................................$ 37.02                  21.81
TRUCK DRIVER: GROUP 4  Buggy Mobile and similar; 
Bulk Cement Tanks and Spreader; Power Operated 
Sweeper; Straddle Carrier (Ross, Hyster and 
similar); Water Tank Truck, 1801-4000 gallons.......$ 36.91                  21.81
TRUCK DRIVER: GROUP 3  Bus Driver or Employee Haul 
Driver; Flat Bed Truck, dual rear axle; Power Boat 
hauling employees or material.......................$ 36.58                  21.81
TRUCK DRIVER: GROUP 2  Flat Bed Truck, single rear 
axle; Fork Lift, 3000 lbs and under; Leverperson 
Loading Trucks at Bunkers; Seeder and Mulcher; 
Stationary Fuel Operator; Team Driver; Tractor 
(small rubber tired, pulling trailer or similar 
equipment); Trailer Mounted hydro Seeder and 
Mulcher; Water Tank Truck, up to 1800 gallons.......$ 36.47                  21.81
TRUCK DRIVER: GROUP 1  Escort Driver or Pilot Car 
tender and swamper, Pickup Hauling Employees or 
Materials...........................................$ 33.83                  21.81
SPRINKLER FITTER....................................$ 41.33                  28.58
SHEET METAL WORKER..................................$ 47.76                  27.70
ROOFER (INCLUDING WATERPROOFER AND KETTLEMAN).......$ 34.72                  13.31
POWER EQUIPMENT OPERATOR: GROUP 8  Cranes(all 
cranes over 100 tons); Climbing, Rail and Tower 
Cranes over 45 tons    ALL CRANE BOOMS, INCLUDING 
TOWER CRANES:  Measure from center of rotation to 
center of shaft  (radius):  130 ft TO 200 ft  .50 
hr. additional to classification   Over 200 ft  .80 
hr. additional to classificaiton. ALL CRANE BOOMS, 
INCLUDING TOWER CRANES:  Measure from center of 
rotation to center of shaft  (radius):  130 ft TO 
200 ft  .50 hr. additional to classification  Over 
200 ft  .80 hr. additional to classificaiton........$ 41.22                  22.45
POWER EQUIPMENT OPERATOR: GROUP 7  Backhoes (3 yds 
and over); Cranes (All Cranesover 45 tons, 
including 100 tons) Climbing, Rail and Tower Cranes 
up to including 45 tons; Clamshell Operator (3 yds. 
and over); Derricks and Stifflegs (65 tons and 
over); Draglines (3 yds and over); Lead Water Well 
Driller; Loader (360 degrees revolving Koehring 
Scooper or similar); Loaders (overhead and 
front-end, over 8 yds); Shovels (3 yds and over); 
Whirleys and Hammerheads, all; Vacuum Blasting 
Machine Operator; HD Mechanic/welder    ALL CRANE 
BOOMS, INCLUDING TOWER CRANES:  Measure from center 
of rotation to center of shaft  (radius):  130 ft 
TO 200 ft  .50 hr. additional to classification  
Over 200 ft  .80 hr. additional to classificaiton. 
ALL CRANE BOOMS, INCLUDING TOWER CRANES:  Measure 
from center of rotation to center of shaft  
(radius):  130 ft TO 200 ft  .50 hr. additional to 
classification  Over 200 ft  .80 hr. additional to 
classificaiton......................................$ 39.11                  22.45
POWER EQUIPMENT OPERATOR: GROUP 6  Asphalt Plant 
Operator (Backhoes (1 yd to 3 yds); Blade (finish 
and bluetop) Automatic, CMI, ABC and similar when 
used as automatic; Boom Cats (side); Cableway 
Operators; Clamshell Operators (under 3 yds); 
Concrete Slip Form Paver; Cranes (over 25 tons, 
including 45 tons); Crusher, Grizzle and Screening 
Plant Operator; Draglines (under 3 yds); Elevating 
Belt (holland type); Gradall (1 yd to 3 yds); 
Loader Operator (front-end and overhead, 4 yards, 
including 8 yds); Mucking Machine; Quadtrack or 
similar equipment; Rubber-tired Scrapers; Shovels 
(under 3 yds); Tractors (D-6 and equivalent and 
over); Vactor Guzzler, Super Sucker; Concrete 
Cleaning/Decontamination Machine; Ultra High 
Pressure Waterjet Cutting Tool System (30,000 psi)  
  ALL CRANE BOOMS, INCLUDING TOWER CRANES:  Measure 
from center of rotation to center of shaft  
(radius):  130 ft TO 200 ft  .50 hr. additional to 
classification  Over 200 ft  .80 hr. additional to 
classificaiton......................................$ 37.96                  22.45
POWER EQUIPMENT OPERATOR: GROUP 5  Automatic 
Subgrader (Ditches and Trimmers) (Autograde, ABC, 
R.A. Hansen and similar on grade wire); Backhoe 
(under 1 yd); Batch Plant (over 4 units); Batch and 
Wet Mix Operator (mutiple units, 2 and including 
4); Boat Operator; Cableway Controller 
(dispatcher); Concrete Pump Boom Truck; Conveyor 
Aggregate Placement Equipment; Cranes (25 tons and 
under); Derricks and Stifflegs (under 65 tons); 
Drill Doctor; Multiple Dozer Units with single 
blade; Paving Machine (asphalt and concrete); 
Piledriving Engineers; Rollerman (finishing 
pavement); Trenching Machines (7 ft depth and 
over). ALL CRANE BOOMS, INCLUDING TOWER CRANES:  
Measure from center of rotation to center of shaft  
(radius):  130 ft TO 200 ft  .50 hr. additional to 
classification  Over 200 ft  .80 hr. additional to 
classificaiton......................................$ 37.64                  22.45
POWER EQUIPMENT OPERATOR: GROUP 4  Blade Operator 
(motor patrol and attachments); Concrete Pumps 
(squeeze-crete, flow-crete, pump-crete, Whitman and 
similar); Drilling Equipment (8 inch bit and over) 
(Robbins, reverse circulation and similar); Drills 
(Churn, Core, Calyx, or Diamond); Equipment 
Serviceman, Greaser and Oiler; Hoe Ram; Hoist (2 or 
more drums or Tower Hoist); Loaders (overhead and 
front-end, under 4 yards R/T);Paving (Dual Drum) 
Rubber Tire; Refrigeration Plant Engineers (under 
1000 ton); Signalman (Whileys, Highline, 
Hammerheads or similar); Skidders (R/T with or 
without attachments); Screed Operator; Trenching 
Machines (under 7 ft depth capacity); Vacuum Drill 
(reverse circulation drill under 8 inch bit)........$ 37.34                  22.45
POWER EQUIPMENT OPERATOR: GROUP 3  A-Frame Truck (2 
or more drums); Assistant Regrigeration Plant and 
Chiller Operator (over 1000 ton); Backfillers 
(Cleveland and similar); Batch Plant and Wet Mix 
Operator single unit (concrete); Belt-crete 
Conveyors with power pack or similar; Belt Laoder 
(Kocal or similar); Bend Machine; Bob Cat; Boring 
Machine (earth); Boring Machine (rock under 8 inch 
bit) (Quarry Master, Joy or similar); Bump Cutter 
(Wayne, Saginau or similar); Canal Lining Machine 
(concrete) Chipper (without crane), Cleaning and 
Doping Machine (pipeline); Curb Extruder (Asphalt 
and Concrete); Deck Engineer; Elevating Belt-type 
Loader (Euclid, Barber Green and similar); 
Elevating Grader-type Loader (Dumor, Adams or 
similar); Generator Plant Engineers (diesel, 
electric); Gunite Combination Mixer and Compressor; 
Locomotive Engineer; Mixermobile; Posthole Auger or 
Punch; Pump (grout or jet); Soil Stabilizer (P & H 
or similar); Spreader Machine; Surface Heater and 
Planer Machine; Tractor (to D-6 or equivalent) and 
Traxacavator; Traverse Finish Machine; Turnhead 
Operator............................................$ 36.99                  22.45
POWER EQUIPMENT OPERATOR: GROUP 2  A-Frame Truck 
(single drum); Assistant Refrigeration Plant (under 
1000 ton); Assistant Plant Operator, Fireman or 
Pugmixer (asphalt); Bagley or Stationary Scraper; 
Belt Finishing Machine; Blower Operator (cement); 
Cement Hog; Compresor (2000 CFM or over, 2 or more, 
gas, diesel or electric power); Concrete Saw 
(multiple cut); Distributor Leverman; Ditch Witch 
or similar; Elevator, hoisting materials; Dope Pots 
(power agitated); Fork Lift or Lumber Stacker, 
Hydra-lift and similar; Gin Trucks (pipeline); 
Hoist, single drum; Loaders (bucket, elevators and 
conveyors); Longitudinal Float; Mixer (portable - 
concrete); Pavement Breaker, Hydra-hammer and 
similar; Power Broom; Spray Curing Machine 
(concrete); Spreader Box (self-propelled); Straddle 
Buggy (Ross and similar on construction job only); 
Tractor (Farm type R/T with attachments, except 
Backhoe); Tugger Operator...........................$ 36.28                  22.45
POWER EQUIPMENT OPERATOR: GROUP 1  Bit Grinders; 
Bolt Threading Machine; Compressors (under 2000 
CFM, gas, diesel or electric power); Crusher Feeder 
(mechanical); Deck Hand; Drillers Tender; Fireman 
and Heater Tender; Grade Checker; Tender Mechanic, 
Welder H.D.; Hydro- seeder, Mulcher, Nozzleman; 
Oiler; Oiler and Cable Tender, Mucking Machine; 
Pumpman; Rollers, all types on subgrade (farm type, 
Case, John Deere and similar, or Compacting 
Vibrator), except when  pulled by Dozer with  
operable blade; Steam Cleaner; Welding Machine......$ 35.91                  22.45
PLUMBER/PIPEFITTER..................................$ 62.95                  33.76
PAINTER (SOFT FLOOR COVERS, GLAZIERS, SPRAY 
PAINTERS, STEEL PAINTERS, STEAM CLEAN AND ACID 
ETCHING, SIGN WRITERS)..............................$ 38.11                  16.27
LABORER: GROUP 9  Grade Checker.....................$ 38.03                  16.30
LABORER: GROUP 8  Powderman.........................$ 37.65                  16.30
LABORER: GROUP 7  Hod Carrier.......................$ 37.10                  16.30
LABORER: GROUP 6  Construction Specialist...........$ 35.94                  16.30
LABORER: GROUP 5  SANDHOGS-[(38-44 LBS),(6 HRS)]  
RATE PER SHIFT (RATES INCREASES ARE COMPUTED BY 
MULTIPLYING THE INCREASE X 8 HOUR SHIFT AND ADD 
TOTAL TO THE PREVIOUS RATE.)........................$ 312.36                  16.30
LABORER: GROUP 5  SANDHOGS-[(26-32 LBS),(6 HRS)]  
RATE PER SHIFT (RATES INCREASES ARE COMPUTED BY 
MULTIPLYING THE INCREASE X 8 HOUR SHIFT AND ADD 
TOTAL TO THE PREVIOUS RATE.)........................$ 307.99                  16.30
LABORER: GROUP 5  SANDHOGS-[(22-26 LBS),(6 HRS)]  
RATE PER SHIFT (RATES INCREASES ARE COMPUTED BY 
MULTIPLYING THE INCREASE X 8 HOUR SHIFT AND ADD 
TOTAL TO THE PREVIOUS RATE.)........................$ 305.37                  16.30
LABORER: GROUP 5  SANDHOGS-[(14-18 LBS),(6 HRS)]  
RATE PER SHIFT(RATES INCREASES ARE COMPUTED BY 
MULTIPLYING THE INCREASE X 8 HOUR SHIFT AND ADD 
TOTAL TO THE PREVIOUS RATE.) .......................$ 300.77                  16.30
LABORER: GROUP 5  SANDHOGS-[(1-14 LBS),(6 HRS)]   
RATE PER SHIFT (RATES INCREASES ARE COMPUTED BY 
MULTIPLYING THE INCREASE X 8 HOUR SHIFT AND ADD 
TOTAL TO THE PREVIOUS RATE.)........................$ 295.84                  16.30
LABORER: GROUP 5  OUTSIDE LOCK AND GAUGE TENDER 
(RATES INCREASES ARE COMPUTED BY MULTIPLYING THE 
INCREASE X 8 HOUR SHIFT AND ADD TOTAL TO THE 
PREVIOUS RATE.).....................................$ 288.48                  16.30
LABORER: GROUP 5   SANDHOGS-[(32-38 LBS),(6 HRS)]  
RATE PER SHIFT (RATES INCREASES ARE COMPUTED BY 
MULTIPLYING THE INCREASE X 8 HOUR SHIFT AND ADD 
TOTAL TO THE PREVIOUS RATE.)........................$ 310.95                  16.30
LABORER: GROUP 5   SANDHOGS-[(18-22 LBS),(6 HRS)]  
RATE PER SHIFT. (RATES INCREASES ARE COMPUTED BY 
MULTIPLYING THE INCREASE X 8 HOUR SHIFT AND ADD 
TOTAL TO THE PREVIOUS RATE.)........................$ 301.05                  16.30
LABORER: GROUP 4  Drills with dual masts, Miner, 
Class """"D""""(to include Raise and Shaft Miner, Laser 
Beam Operator on raises and shafts.) Welder, 
electric, manual or automatic, Remote Equipment 
Operator (to include HDPE or similar pipe and 
liner)..............................................$ 36.06                  16.30
LABORER: GROUP 3- AIR AND HYDRAULIC TRACK DRILL, 
ASPHALT RAKER, BRUSH MACHINE (TO INCLUDE HORIZONTAL 
CONSTRUCTION JOINT CLEAN-UP BRUSH MACHINE, POWER 
PROPELLED); CAISSON WORKER, FREE AIR; CHAIN SAW 
OPERATOR AND FALLER; CONCRETE STACK (TO INCLUDE 
LABORERS WHEN WORKING ON FREE STANDING CONCRETE 
STACKS FOR SMOKE OR FUME CONTROL ABOVE 40 FT HIGH); 
FUNNITE (TO INCLUDE OPERATION OF MACHINE AND 
NOZZLE); GUNNITE (TO INCLUDE OPERATION OF MACHINE 
AND NOZZEL); HIGH SCALER; MINER, CLASS ""C"" (TO 
INCLUDE MINER, NOZZLEMAN FOR CONCRETE, LASER BEAM 
OPERATOR, AND RIGGER ON TUNNELS); MONITOR OPERATOR 
(AIR TRACK OR SIMILAR MOUNTING); MORTAR MIXER; 
NOZZLEMAN (TO INCLUDE JET BLASTING NOZZLEMAN, OVER 
1200 LBS., JET BLAST MACHINE, POWER PROPELLED, 
SANDBLAST NOZZLE, SQUEEZE AND FLO-CRETE NOZZLE); 
PAVEMENT BREAKER, 90 LBS. & OVER; PIPELAYER (TO 
INCLUDE WORKING TOPMAN, CAULKER, COLLARMAN, 
JOINTER, MORTARMAN, RIGGER, JACKER, SHORER, VALVE 
OR METER INSTALLER, TEMPER, (INCLUDING PRESSURIZED 
AND NON-PRESSURIZED DUCTILE PIPE, GRAVITY PIPE AND 
HDPE (FUSED AND NON-FUSED); PIPEWRAPPER; PLASTERER 
TENDER, TRENCHLESS TECHNOLOGY, VIBRATORS (ALL); 
LASER BEAM OPERATOR (ELEVATION CONTROL; 
TECHNICIAN).........................................$ 35.74                  16.30
LABORER: GROUP 2- ASPHALT ROLLER, WALKING; CEMENT 
FINISHER TENDER; CONCRETE SAW, WALKING; DEMOLITION 
TORCH; DOPE POT FIREMAN, NON-MECHANICAL; DRILLER 
TENDER (WHEN REQUIRED TO MOVE AND POSITION 
MACHINE); FORM SETTER, PAVING; JACKHAMMER OPERATOR; 
MINER, CLASS ""B"" (TO INCLUDE BRAKEMAN, FINISHER, 
VIBRATOR, AND FORM SETTER); NOZZLEMAN (TO INCLUDE 
SQUEEZE AND FLOW-CRETE NOZZLE); NOZZLEMAN, WATER, 
(TO INCLUDE FIRE HOSE), AIR OR STEAM; PAVEMENT 
BREAKER (UNDER 90 LBS); PIPELAYER, CORRUGATED METAL 
AND MULTI-PLATE; POT TENDER; POWER BUGGY OPERATOR; 
POWER TOOL OPERATOR, GAS, ELECTRICAL, PNEUMATIC; 
RODDER AND SPREADER; TRENCHER, SHAWNEE; TUGGER 
OPERATOR; WAGON DRILLS; WHEELBARROW, POWER DRIVEN; 
WATER PIPE LINER, RIGGER/SIGNALPERSON, REMOTE 
EQUIPMENT OPERATOR (I.E. COMPACTION AND EMOLITION) 
COMPACTION EQUIPMENT (TO INCLUDE ALL HAND 
OPERATORED POWER COMPACTION EQUIPMENT); RAILROAD 
POWER SPIKER OR PULLER, DUAL MOBILE; RAILROAD 
EQUIPMENT, POWER DRIVEN, EXCEPT DUAL MOBILE POWER 
SPIKER OR PULLER....................................$ 35.42                  16.30
LABORER: GROUP 1- FLAGMAN, LANDSCAPE LABORER, 
SCALEMAN, TRAFFIC CONTROL SUPERVISOR, ASBESTOS 
ABATEMENT WORKER, BRICK PAVERS (TO INCLUDE THE 
INSTALLATION OF BRICK OR GRASS PAVERS FOR 
SIDEWALKS, DRIVEWAYS, STREETS, AND PARKING LOTS), 
BRUCH HOG FEEDER; CARPENTER TENDER; CEMENT HANDLER; 
CONCRETE SIGNALMAN; CONCRETE CREWMAN (TO INCLUDE 
STRIPPING OF FORMS, HAND OPERATING JACKS ON SLIP 
FORM CONSTRUCTION, APPLICATION OF CONCRETE CURING 
COMOUNDS, PUMPCRETE MACHINE, SIGNALING, HANDLING 
THE NOZZLE OF SQUEEZCRETE OR SIMILAR MACHINE-6 
INCHES AND SMALLER); CONFINED SPACE ATTENDANT, 
CRUSHER FEEDER; DEMOLITION (TO INCLUDE CLEAN-UP, 
BURNING, LOADING, WRECKING AND SALVAGE OF ALL 
MATERIAL); DRY STACK WALLS (INCLUDING ALL DRY STACK 
WALLS, INCLUDING KEYSTONE WALLS AND OTHERS USING 
BLOCKS AND INTERLOCKING PEGS.), DUMPMAN; TRAFFIC 
CONTROL LABORER (TO INCLUDE BUT IS NOT LIMITED TO, 
ERECTION AND MAINTENANCE OF BARRICADES, SIGNS AND 
RELIEF OF FLAG PERSON.), WINDOW WASHER/CLEANER, 
PILOT CAR, HAZARDOUS WASTE WORKER, EROSION CONTROL 
LABORER, FENCE ERECTOR, GUARD RAIL (TO INCLUDE 
GUARD RAIL, GUIDE AND REFERENCE POSTS, SIGN POSTS, 
AND RIGHT-OF-WAY MARKERS); FIREWATH. FORM CLEANING 
MACHINE FEEDER; STACKER; GENERAL LABORER; GROUP 
MACHINE HEADER TENDER; MINER, CLASS ""A"" (TO INCLUDE 
BULL GNAG, CONCRETE CREWMAN, DUMPAN AND PUMPCRETE 
CREWMAN, INCLUDING DISTRIBUTING PIP, ASSEMBLY AND 
DISMANTLE, AND NIPPER); LEAD ABATEMENT WORKER, MOLD 
ABATEMENT WORKER, NIPPER; RIPRAP MAN; SANDBLAST 
TAILHOSEMAN, SCAFFOLD ERECTOR (WOOD OR STEEL); 
STAKE JUMPER; STRUCTURAL MOVER (TO INCLUDE 
SEPARATING FOUNDATION, PREPARATION, CRIBBING, 
SHORING, JACKING AND UNLOADING OF STRUCTURES); 
TAILHOSEMAN (WATER NOSSEL); TIMBER BUCKER AND 
FALLER (BY HAND); TRACK LABORER (RR); TRUCK LOADER; 
WELLPOINT MAN; (hdpe OR SIMILAR LINER INSTALLER)....$ 35.10                  16.30
IRONWORKER..........................................$ 41.91                  32.27
ELECTRICIAN: ELECTRICIANS...........................$ 58.00                  25.92
ELECTRICIAN: CABLE SPLICERS.........................$ 60.90                  26.01
DRYWALL FINISHER/TAPER..............................$ 35.45                  18.13
CEMENT MASON/CONCRETE FINISHER (GROUP 3)  Grinding, 
bushing or chipping of toxic materials or high 
density concrete; Operating of power tools on a 
scaffold............................................$ 40.68                  17.04
CEMENT MASON/CONCRETE FINISHER (GROUP 2)  Power 
troweling machine operator; Troweling of magnesite, 
torganal or material with epoxy bases of 
oxichloride base; All power grinders, bushing 
hammer, chipping gun; Gunite Nozzleman. All 
sandblasting for architectural finishes, patch 
preparation and exposing of aggregate for finish; 
Concrete sawing and cutting for concrete and 
expansion joints and scoring for decorative 
patterns; Operating of Clary-type floats, 
Longitudinal Floats, Rodding Machines and Belting 
Machines; Scarifiers; Working on scaffolds..........$ 40.17                  17.04
CEMENT MASON/CONCRETE FINISHER (GROUP 1)  Rodding, 
tamping, floating, troweling, patching, stoning, 
rubbing, sack rubbing; All exposed aggregate 
finishing and sealing. All architectural finishing, 
staining, stamping and coloring, washing and power 
washing of concrete, polymer, latex and composite 
materials; Setting of screeds, screeds forms, curb 
and gutter and sidewalk forms; Preparation of all 
concrete for caulking of the joints and the 
caulking of expansion joints; Preparation of 
concrete for the application of hardners, sealers 
and curing compounds and their application; 
Grouting and dry packing of machine base; Removal 
of snap ties and she bolts prior to patching of 
concrete............................................$ 39.55                  17.04
CARPENTER: PILEDRIVER...............................$ 47.41                  16.56
CARPENTER: TENDERS..................................$ 51.73                  16.56
CARPENTER: MILLWRIGHT & MACHINE ERECTOR.............$ 59.83                  19.05
CARPENTER: DIVERS...................................$ 52.73                  16.56
CARPENTER: CARPENTERS...............................$ 45.86                  16.56
BRICKLAYER..........................................$ 38.48                  20.09
BOILERMAKER.........................................$ 43.83                  32.56
ASBESTOS WORKER/HEAT & FROST INSULATOR..............$ 44.51                  22.89
----------------------------------------------------------------

----------------------------------------------------------------------------------------------------
WELDERS - Receive rate prescribed for craft performing
operation to which welding is incidental.
================================================================
Note: Executive Order (EO) 13706, Establishing Paid Sick Leave
for Federal Contractors applies to all contracts subject to the
Davis-Bacon Act for which the contract is awarded (and any
solicitation was issued) on or after January 1, 2017.  If this
contract is covered by the EO, the contractor must provide
employees with 1 hour of paid sick leave for every 30 hours
they work, up to 56 hours of paid sick leave each year.
Employees must be permitted to use paid sick leave for their
own illness, injury or other health-related needs, including
preventive care; to assist a family member (or person who is
like family to the employee) who is ill, injured, or has other
health-related needs, including preventive care; or for reasons
resulting from, or to assist a family member (or person who is
like family to the employee) who is a victim of, domestic
violence, sexual assault, or stalking.  Additional information
on contractor requirements and worker protections under the EO
is available at https://www.dol.gov/agencies/whd/government-contracts.

Note: Executive Order 13658 generally applies to contracts subject 
to the Davis-Bacon Act that were awarded on or between January 1, 
2015 and January 29, 2022, and that have not been renewed or 
extended on or after January 30, 2022. Executive Order 13658 does 
not apply to contracts subject only to the Davis-Bacon Related Acts 
regardless of when they were awarded. If a contract is subject to 
Executive Order 13658, the contractor must pay all covered workers 
at least $13.65 per hour (or the applicable wage rate listed on this 
wage determination, if it is higher) for all hours spent performing on 
the contract from May 11, 2026, through December 31, 2026.  The 
applicable Executive Order minimum wage rate will be adjusted annually.
Additional information on contractor requirements and worker 
protections under Executive Order 13658 is available at 
www.dol.gov/whd/govcontracts.

Unlisted classifications needed for work not included within
the scope of the classifications listed may be added after
award only as provided in the labor standards contract clauses
(29CFR 5.5 (a) (1) (iii)).
-----------------------------------------------------------------------------------------------------
The body of each wage determination lists the classifications
and wage rates that have been found to be prevailing for the
type(s) of construction and geographic area covered by the wage
determination. The classifications are listed in alphabetical
order under rate identifiers indicating whether the particular
rate is a union rate (current union negotiated rate), a survey
rate, a weighted union average rate, a state adopted rate, or a
supplemental classification rate.

Union Rate Identifiers

A four-letter identifier beginning with characters other than
�SU�, �UAVG�, �SA�, or �SC� denotes that a union rate was
prevailing for that classification in the survey. Example:
PLUM0198-005 07/01/2024. PLUM is an identifier of the union
whose collectively bargained rate prevailed in the survey for
this classification, which in this example would be Plumbers.
0198 indicates the local union number or district council
number where applicable, i.e., Plumbers Local 0198. The next
number, 005 in the example, is an internal number used in
processing the wage determination. The date, 07/01/2024 in the
example, is the effective date of the most current negotiated
rate.

Union prevailing wage rates are updated to reflect all changes
over time that are reported to WHD in the rates
in the collective bargaining agreement (CBA) governing the
classification.

Union Average Rate Identifiers

The UAVG identifier indicates that no single rate prevailed for
those classifications, but that 100% of the data reported for
the classifications reflected union rates. EXAMPLE:
UAVG-OH-0010 01/01/2024. UAVG indicates that the rate is a
weighted union average rate. OH indicates the State of Ohio.
The next number, 0010 in the example, is an internal number
used in producing the wage determination. The date, 01/01/2024
in the example, indicates the date the wage determination was
updated to reflect the most current union average rate.

A UAVG rate will be updated once a year, usually in January, to
reflect a weighted average of the current rates in the
collective bargaining agreements on which the rate is based.

Survey Rate Identifiers

The �SU� identifier indicates that either a single non-union
rate prevailed (as defined in 29 CFR 1.2) for this
classification in the survey or that the rate was derived by
computing a weighted average rate based on all the rates
reported in the survey for that classification. As a weighted
average rate includes all rates reported in the survey, it may
include both union and non-union rates. Example: SUFL2022-007
6/27/2024. SU indicates the rate is a single non-union
prevailing rate or a weighted average of survey data for that
classification. FL indicates the State of Florida. 2022 is the
year of the survey on which these classifications and rates are
based. The next number, 007 in the example, is an internal
number used in producing the wage determination. The date,
6/27/2024 in the example, indicates the survey completion date
for the classifications and rates under that identifier.

�SU� wage rates typically remain in effect until a new survey
is conducted. However, the Wage and Hour Division (WHD) has the
discretion to update such rates under 29 CFR 1.6(c)(1).

State Adopted Rate Identifiers

The �SA� identifier indicates that the classifications and
prevailing wage rates set by a state (or local) government were
adopted under 29 C.F.R 1.3(g)-(h).  Example: SAME2023-007
01/03/2024. SA reflects that the rates are state adopted. ME
refers to the State of Maine. 2023 is the year during which the
state completed the survey on which the listed classifications
and rates are based. The next number, 007 in the example, is an
internal number used in producing the wage determination.
The date, 01/03/2024 in the example, reflects the date on which
the classifications and rates under the �SA� identifier took
effect under state law in the state from which the rates were
adopted.
-----------------------------------------------------------------------------------------------------
WAGE DETERMINATION APPEALS PROCESS
1) Has there been an initial decision in the matter? This can
be:
           a) a survey underlying a wage determination
           b) an existing published wage determination
           c) an initial WHD letter setting forth a position on
                a wage determination matter
           d) an initial conformance (additional classification
                and rate) determination
On survey related matters, initial contact, including requests
for summaries of surveys, should be directed to the WHD Branch
of Wage Surveys. Requests can be submitted via email to
davisbaconinfo@dol.gov or by mail to:
            Branch of Wage Surveys
            Wage and Hour Division
            U.S. Department of Labor
            200 Constitution Avenue, N.W.
            Washington, DC 20210
Regarding any other wage determination matter such as
conformance decisions, requests for initial decisions should be
directed to the WHD Branch of Construction Wage Determinations.
Requests can be submitted via email to BCWD-Office@dol.gov or
by mail to:
            Branch of Construction Wage Determinations
            Wage and Hour Division
            U.S. Department of Labor
            200 Constitution Avenue, N.W.
            Washington, DC 20210
2) If an initial decision has been issued, then any interested
party (those affected by the action) that disagrees with the
decision can request review and reconsideration from the Wage
and Hour Administrator (See 29 CFR Part 1.8 and 29 CFR Part 7).
Requests for review and reconsideration can be submitted via
email to dba.reconsideration@dol.gov or by mail to:
            Wage and Hour Administrator
            U.S. Department of Labor
            200 Constitution Avenue, N.W.
            Washington, DC 20210
The request should be accompanied by a full statement of the
interested party's position and any information (wage payment
data, project description, area practice material, etc.) that
the requestor considers relevant to the issue.

3) If the decision of the Administrator is not favorable, an
interested party may appeal directly to the Administrative
Review Board (formerly the Wage Appeals Board).  Write to:
            Administrative Review Board
            U.S. Department of Labor
            200 Constitution Avenue, N.W.
            Washington, DC 20210.
================================================================
          END OF GENERAL DECISION
"