What is the Davis-Bacon prevailing wage for a glazier in New Jersey?

There is no single figure. Active federal determinations for New Jersey publish 19 glazier classification rates ranging from $30.82 to $52.68 per hour before fringe benefits. The rate that applies depends on the county, the type of construction and the wage determination incorporated into the contract.

How many counties in New Jersey have a published glazier rate?

17 of the counties covered by active federal determinations list at least one glazier classification.

Do these rates apply to state-funded projects?

No. These are federal Davis-Bacon rates, which apply to federally funded or assisted construction. New Jersey may set its own prevailing wage rates for state and locally funded work; the state law summary is on the New Jersey prevailing wage page.

Home › Trades › Glazier › New Jersey

Glazier prevailing wage rates in New Jersey

Federal Davis-Bacon rates published in 17 active determinations, 2026

Active federal Davis-Bacon determinations for New Jersey publish 19 glazier classification rates, across 17 determinations covering 17 counties.
Those published base rates run from $30.82 to $52.68 an hour before fringe benefits. Which one applies to a job depends on its county, its construction type and the determination written into the contract.
Construction types covered: Building.
Last determination revision affecting glazier rates in New Jersey: 2026-08-13.

The official source: binding Davis-Bacon and Service Contract Act wage determinations are published by the U.S. Department of Labor at SAM.gov Wage Determinations. This site indexes them and links every determination to its official document - the determination incorporated into a contract governs.

This page collects every classification in New Jersey's active federal determinations that is a form of glazier work (glass, curtain wall and storefront) and shows the rate published for it. Determinations name a classification the way the underlying union agreement or wage survey named it, so the wording varies between them; the rate and the fringe are reproduced exactly as published.

Published rates by determination

NJ20260025 rev 1 · Building · Atlantic

Classification as published	Base rate	Fringes	Rate schedule
GLAZIER Work at 30 ft. above the working surface, or on a swing stage: $1.00 per hour additional	$49.96	35.11	PAIN0021-035 collectively bargained (union) rate

Official document: NJ20260025 on SAM.gov.

NJ20260026 rev 1 · Building · Bergen

Classification as published	Base rate	Fringes	Rate schedule
GLAZIER Work welding or using a cutting torch: $1.00 per hour Work on a swing stage scaffold; on a pipe scaffold providing the working height of the platform is 30 ft. or above; an	$52.68	31.29	PAIN0711-021 collectively bargained (union) rate

Official document: NJ20260026 on SAM.gov.

NJ20260027 rev 2 · Building · Burlington

Classification as published	Base rate	Fringes	Rate schedule
GLAZIER (BURLINGTON COUNTY (south of a line drawn between these cities: Florence to Bustleton to Columbus to Jobstown to Pemberton to Ongs Hat to Chatsworth to Whiting to Pinewald	$49.96	35.11	PAIN0021-032 collectively bargained (union) rate
GLAZIER (BURLINGTON COUNTY (north of a line drawn between these cities: Florence to Bustleton to Columbus to Jobstown to Pemberton to Ongs Hat to Chatsworth to Whiting to Pinewald	$52.68	31.29	PAIN0711-011 collectively bargained (union) rate

Official document: NJ20260027 on SAM.gov.

NJ20260028 rev 1 · Building · Camden

Classification as published	Base rate	Fringes	Rate schedule
GLAZIER	$30.82	15.60	SUNJ2004-004 DOL wage survey rate

Official document: NJ20260028 on SAM.gov.

NJ20260030 rev 1 · Building · Cumberland

Classification as published	Base rate	Fringes	Rate schedule
GLAZIER Work at 30 ft. above the working surface, or on a swing stage: $1.00 per hour additional	$49.96	35.11	PAIN0021-035 collectively bargained (union) rate

Official document: NJ20260030 on SAM.gov.

NJ20260031 rev 1 · Building · Essex

Classification as published	Base rate	Fringes	Rate schedule
GLAZIER Work welding or using a cutting torch: $1.00 per hour Work on a swing stage scaffold; on a pipe scaffold providing the working height of the platform is 30 ft. or above; an	$52.68	31.29	PAIN0711-021 collectively bargained (union) rate

Official document: NJ20260031 on SAM.gov.

NJ20260035 rev 2 · Building · Mercer

Classification as published	Base rate	Fringes	Rate schedule
GLAZIER WORK WELDING OR USING A CUTTING TORCH: $1.00 PER HOUR ADDITIONAL. WORK ON A SWING STAGE SCAFFOLD; ON A PIPE SCAFFOLD PROVIDING THE WORKING HEIGHT OF THE PLATFORM IS 30 FT.	$52.68	31.29	PAIN0711-017 collectively bargained (union) rate

Official document: NJ20260035 on SAM.gov.

NJ20260036 rev 1 · Building · Middlesex

Classification as published	Base rate	Fringes	Rate schedule
GLAZIER WORK WELDING OR USING A CUTTING TORCH: $1.00 PER HOUR ADDITIONAL. WORK ON A SWING STAGE SCAFFOLD; ON A PIPE SCAFFOLD PROVIDING THE WORKING HEIGHT OF THE PLATFORM IS 30 FT.	$52.68	31.29	PAIN0711-021 collectively bargained (union) rate

Official document: NJ20260036 on SAM.gov.

NJ20260037 rev 1 · Building · Monmouth

Classification as published	Base rate	Fringes	Rate schedule
GLAZIER WORK WELDING OR USING A CUTTING TORCH: $1.00 PER HOUR ADDITIONAL. WORK ON A SWING STAGE SCAFFOLD; ON A PIPE SCAFFOLD PROVIDING THE WORKING HEIGHT OF THE PLATFORM IS 30 FT.	$52.68	31.29	PAIN0711-017 collectively bargained (union) rate

Official document: NJ20260037 on SAM.gov.

NJ20260038 rev 1 · Building · Morris

Classification as published	Base rate	Fringes	Rate schedule
GLAZIER WORK WELDING OR USING A CUTTING TORCH: $1.00 PER HOUR ADDITIONAL. WORK ON A SWING STAGE SCAFFOLD; ON A PIPE SCAFFOLD PROVIDING THE WORKING HEIGHT OF THE PLATFORM IS 30 FT.	$52.68	31.29	PAIN0711-021 collectively bargained (union) rate

Official document: NJ20260038 on SAM.gov.

NJ20260039 rev 1 · Building · Ocean

Classification as published	Base rate	Fringes	Rate schedule
GLAZIER (OCEAN COUNTY (SOUTH OF A LINE DRAWN BETWEEN THESE CITIES: FLORENCE TO BUSTLETON TO COLUMBUS TO JOBSTOWN TO PEMBERTON TO ONGS HAT TO CHATSWORTH TO WHITING TO PINEWALD TO OC	$49.96	35.11	PAIN0021-034 collectively bargained (union) rate
GLAZIER (OCEAN COUNTY (NORTH OF A LINE DRAWN BETWEEN THESE CITIES: FLORENCE TO BUSTLETON TO COLUMBUS TO JOBSTOWN TO PEMBERTON TO ONGS HAT TO CHATSWORTH TO WHITING TO PINEWALD TO OC	$52.68	31.29	PAIN0711-016 collectively bargained (union) rate

Official document: NJ20260039 on SAM.gov.

NJ20260040 rev 2 · Building · Passaic

Classification as published	Base rate	Fringes	Rate schedule
GLAZIER (WORK WELDING OR USING A CUTTING TORCH: $1.00 PER HOUR ADDITIONAL.) WORK ON A SWING STAGE SCAFFOLD; ON A PIPE SCAFFOLD PROVIDING THE WORKING HEIGHT OF THE PLATFORM IS 30 FT	$52.68	31.29	PAIN0711-021 collectively bargained (union) rate

Official document: NJ20260040 on SAM.gov.

NJ20260041 rev 2 · Building · Salem

Classification as published	Base rate	Fringes	Rate schedule
GLAZIER (WORK AT 30 FT. ABOVE THE WORKING SURFACE, OR ON A SWING STAGE: $1.00 PER HOUR ADDITIONAL.)	$49.96	35.11	PAIN0021-035 collectively bargained (union) rate

Official document: NJ20260041 on SAM.gov.

NJ20260042 rev 2 · Building · Somerset

Classification as published	Base rate	Fringes	Rate schedule
GLAZIER (WORK WELDING OR USING A CUTTING TORCH: $1.00 PER HOUR ADDITIONAL.) (WORK ON A SWING STAGE SCAFFOLD; ON A PIPE SCAFFOLD PROVIDING THE WORKING HEIGHT OF THE PLATFORM IS 30 F	$52.68	31.29	PAIN0711-021 collectively bargained (union) rate

Official document: NJ20260042 on SAM.gov.

NJ20260043 rev 2 · Building · Sussex

Classification as published	Base rate	Fringes	Rate schedule
GLAZIER (WORK WELDING OR USING A CUTTING TORCH: $1.00 PER HOUR ADDITIONAL.) (WORK ON A SWING STAGE SCAFFOLD; ON A PIPE SCAFFOLD PROVIDING THE WORKING HEIGHT OF THE PLATFORM IS 30 F	$52.68	31.29	PAIN0711-021 collectively bargained (union) rate

Official document: NJ20260043 on SAM.gov.

NJ20260044 rev 2 · Building · Union

Classification as published	Base rate	Fringes	Rate schedule
GLAZIER (WORK WELDING OR USING A CUTTING TORCH: $1.00 PER HOUR ADDITIONAL.) (WORK ON A SWING STAGE SCAFFOLD; ON A PIPE SCAFFOLD PROVIDING THE WORKING HEIGHT OF THE PLATFORM IS 30 F	$52.68	31.29	PAIN0711-021 collectively bargained (union) rate

Official document: NJ20260044 on SAM.gov.

NJ20260045 rev 2 · Building · Warren

Classification as published	Base rate	Fringes	Rate schedule
GLAZIER (WORK WELDING OR USING A CUTTING TORCH: $1.00 PER HOUR ADDITIONAL.) (WORK ON A SWING STAGE SCAFFOLD; ON A PIPE SCAFFOLD PROVIDING THE WORKING HEIGHT OF THE PLATFORM IS 30 F	$52.68	31.29	PAIN0711-021 collectively bargained (union) rate

Official document: NJ20260045 on SAM.gov.

Where to go next

Glazier rates in every state · New Jersey prevailing wage and state law · New Jersey determinations by county · pay calculator

Other trades in New Jersey

Electrician · Plumber · Pipefitter · Sheet Metal Worker · Carpenter · Construction Laborer · Heavy Equipment Operator · Truck Driver · Ironworker · Cement Mason / Concrete Finisher · Bricklayer / Mason · Roofer · Painter · Drywall Finisher / Taper · Plasterer · Insulator (Heat & Frost) · Millwright · Elevator Constructor · Sprinkler Fitter · Piledriver · Tile Setter · Tile Finisher · Floor Layer · Line Constructor / Lineman